ASTM A959:2011 443: Ferritic stainless steel type 443 (UNS S44300) with the composition limits of ASTM A959-11. Carbon up to 0.20% and chromium 18.0-23.0%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C
Cr
Cu
Mn
Ni
P
S
Si
<=0.20
18.0-23.0
0.90-1.25
<=1.00
<=0.50
<=0.040
<=0.030
<=1.00
More data from ASTM A959:2011
From the standard
Other composition limitsfrom Table 1 and its footnotes
UNS number
S44300
Metallurgical class
Ferritic grade: body-centered cubic, little or no tempered martensite, hardenable only slightly by cold working
Type
443 (common type number, not a trademark, widely used; not associated with any one product)
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
Other elements (as printed)
Cu 0.90-1.25
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes
Active ASTM A959:2011 443 Listings on M-EX (For Sale)