Post Stock Login Register

ASTM A959 616 vs GOST 5632 08X18H10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

ASTM A959 616 (ASTM A959:2011) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 616 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. ASTM A959 616 is defined under ASTM International (United States).

As per chemical composition, ASTM A959 616 vs GOST 5632 08X18H10 is a 42.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With ASTM A959 616:
IS 1570 (Part 7) 20Cr12MoNiVH EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
42.2%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property ASTM A959 616 GOST 5632 08X18H10
Standard ASTM A959:2011 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) 0.20-0.25 ≤0.08
Cr (%) 11.0-12.5 17.0–19.0
Mn (%) 0.50-1.00 ≤2.00
Mo (%) 0.90-1.25 Not specified
Ni (%) 0.50-1.00 9.0–11.0
P (%) <=0.025 ≤0.035
S (%) <=0.025 ≤0.020
Si (%) <=0.50 ≤0.80
V (%) 0.20-0.30 Not specified
W (%) 0.90-1.25 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 616 GOST 5632 08X18H10
Tensile Strength Not specified ≥520 MPa
Yield Strength Not specified ≥205 MPa
Elongation Not specified ≥40%
Typical Applications
ASTM A959 616
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
Can ASTM A959 616 Be Substituted With GOST 5632 08X18H10?
ASTM A959 616 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A959 616
No active listings currently.
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
ASTM A959 616
0 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 616 and GOST 5632 08X18H10?
ASTM A959 616 specifies Mo, V, W which are not specified for GOST 5632 08X18H10.
Can ASTM A959 616 be substituted with GOST 5632 08X18H10?
ASTM A959 616 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.