ASTM A959:2011 616: Martensitic stainless steel type 616 (UNS S42200) with the composition limits of ASTM A959-11. Carbon 0.20-0.25% and chromium 11.0-12.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C
Cr
Mn
Mo
Ni
P
S
Si
V
W
0.20-0.25
11.0-12.5
0.50-1.00
0.90-1.25
0.50-1.00
<=0.025
<=0.025
<=0.50
0.20-0.30
0.90-1.25
More data from ASTM A959:2011
From the standard
Other composition limitsfrom Table 1 and its footnotes
UNS number
S42200
Metallurgical class
Martensitic grade: can be hardened by heat treating and quenching and then tempered; delivered annealed or hardened and tempered
Type
616 (common type number, not a trademark, widely used; not associated with any one product)
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
Other elements (as printed)
V 0.20-0.30, W 0.90-1.25
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes
Active ASTM A959:2011 616 Listings on M-EX (For Sale)