Post Stock Login Register

ASTM A959 S32760 vs EN 10088-1 X2CrNiMoCuN25-6-3

Strong Match — 85.9% match based on chemical composition and mechanical property overlap.

ASTM A959 S32760 (ASTM A959:2011) and EN 10088-1 X2CrNiMoCuN25-6-3 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S32760 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMoCuN25-6-3 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 S32760 vs EN 10088-1 X2CrNiMoCuN25-6-3 is a 85.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.9%.

Frequently Compared With ASTM A959 S32760:
EN 10088-1 1.4301 GB/T 3280 06Cr19Ni10 ASTM A959 2507 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH ASTM A959 26-3-3 ASTM A959 .- IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10
Match Breakdown
CHEMISTRY MATCH
85.9%
MECHANICAL MATCH
No shared data
OVERALL
85.9%
Specifications
Property ASTM A959 S32760 EN 10088-1 X2CrNiMoCuN25-6-3
Standard ASTM A959:2011 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Cr (%) 24.0-26.0 24.0-26.0
Cu (%) 0.50-1.00 1.00-2.50
Mn (%) <=1.00 <=2.00
Mo (%) 3.0-4.0 3.0-4.0
N (%) 0.20-0.30 0.20-0.30
Ni (%) 6.0-8.0 6.0-8.0
P (%) <=0.030 <=0.035
S (%) <=0.010 <=0.015
Si (%) <=1.00 <=0.70
W (%) 0.50-1.00 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S32760
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X2CrNiMoCuN25-6-3
Not documented
Key Differences
Can ASTM A959 S32760 Be Substituted With EN 10088-1 X2CrNiMoCuN25-6-3?
ASTM A959 S32760 and EN 10088-1 X2CrNiMoCuN25-6-3 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMoCuN25-6-3 is often considered as a substitute for ASTM A959 S32760 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 S32760
0 active listings and RFQs →
EN 10088-1 X2CrNiMoCuN25-6-3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S32760 and EN 10088-1 X2CrNiMoCuN25-6-3?
ASTM A959 S32760 specifies W which is not specified for EN 10088-1 X2CrNiMoCuN25-6-3.
Can ASTM A959 S32760 be substituted with EN 10088-1 X2CrNiMoCuN25-6-3?
ASTM A959 S32760 and EN 10088-1 X2CrNiMoCuN25-6-3 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMoCuN25-6-3 is often considered as a substitute for ASTM A959 S32760 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.