Post Stock Login Register

ASTM A959 S32906 vs EN 10088-1 X2CrNiMoN29-7-2

Strong Match — 98.6% match based on chemical composition and mechanical property overlap.

ASTM A959 S32906 (ASTM A959:2011) and EN 10088-1 X2CrNiMoN29-7-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S32906 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMoN29-7-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 S32906 vs EN 10088-1 X2CrNiMoN29-7-2 is a 98.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 98.6%.

Frequently Compared With ASTM A959 S32906:
ASTM A959 29-4 ASTM A959 29-4-2 GOST 5632 08X18H10 ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH GOST 5632 06Kh23N28 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 29-4C
Match Breakdown
CHEMISTRY MATCH
98.6%
MECHANICAL MATCH
No shared data
OVERALL
98.6%
Specifications
Property ASTM A959 S32906 EN 10088-1 X2CrNiMoN29-7-2
Standard ASTM A959:2011 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Cr (%) 28.0-30.0 28.0-30.0
Cu (%) <=0.80 <=0.80
Mn (%) 0.80-1.50 0.80-1.50
Mo (%) 1.50-2.60 1.50-2.60
N (%) 0.30-0.40 0.30-0.40
Ni (%) 5.8-7.5 5.8-7.5
P (%) <=0.030 <=0.030
S (%) <=0.030 <=0.015
Si (%) <=0.50 <=0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S32906
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X2CrNiMoN29-7-2
Not documented
Can ASTM A959 S32906 Be Substituted With EN 10088-1 X2CrNiMoN29-7-2?
ASTM A959 S32906 and EN 10088-1 X2CrNiMoN29-7-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMoN29-7-2 is often considered as a substitute for ASTM A959 S32906 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 S32906
0 active listings and RFQs →
EN 10088-1 X2CrNiMoN29-7-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S32906 and EN 10088-1 X2CrNiMoN29-7-2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 S32906 be substituted with EN 10088-1 X2CrNiMoN29-7-2?
ASTM A959 S32906 and EN 10088-1 X2CrNiMoN29-7-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMoN29-7-2 is often considered as a substitute for ASTM A959 S32906 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.