Post Stock Login Register

ASTM A959:2011 S41003 Steel: Specifications & Listings

ASTM A959:2011 S41003: Martensitic stainless steel grade (UNS S41003) with the composition limits of ASTM A959-11. Carbon up to 0.030% and chromium 10.5-12.5%.

Category: Stainless Steel
Grade Details
GradeASTM A959:2011 S41003
Standard ASTM A959:2011
ApplicationsWrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A240/A240M S41003 ASTM A240/A240M:2025 USA No activity yet
EN 10088-3 X2CrNi12 EN 10088-3:2014 Europe No activity yet
ASTM A240/A240M S40977 ASTM A240/A240M:2025 USA No activity yet
EN 10088-1 X2CrNi12 EN 10088-1:2014 Europe (CEN) No activity yet
JIS G4304 SUS410L JIS G4304:2021 Japan No activity yet
ASTM A240/A240M S41050 ASTM A240/A240M:2025 USA No activity yet
EN 10088-1 X2CrMnNiTi12 EN 10088-1:2014 Europe (CEN) No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A240/A240M S41003 ASTM A240/A240M:2025 Strong Match
EN 10088-3 X2CrNi12 EN 10088-3:2014 Strong Match
ASTM A959 S40977 ASTM A959:2011 Strong Match
ASTM A240/A240M S40977 ASTM A240/A240M:2025 Strong Match
EN 10088-1 X2CrNi12 EN 10088-1:2014 Strong Match
EN 10088-2 X2CrNi12 EN 10088-2:2014 Strong Match
EN 10088-1 X2CrNi12 EN 10088-1:2023 Strong Match
ASTM A959 S40975 ASTM A959:2011 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Cr Mn N Ni P S Si
<=0.030 10.5-12.5 <=1.50 <=0.030 <=1.50 <=0.040 <=0.030 <=1.00

More data from ASTM A959:2011

From the standard
Other composition limits from Table 1 and its footnotes
UNS number
S41003
Metallurgical class
Martensitic grade: can be hardened by heat treating and quenching and then tempered; delivered annealed or hardened and tempered
Type
No type number is printed; the grade is identified by its UNS number only
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes

Active ASTM A959:2011 S41003 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A959:2011 S41003 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A959:2011 S41003

+ Post an RFQ for this grade

No open buyer requirements for ASTM A959:2011 S41003 at this time.

Register for Alerts