Post Stock Login Register

ASTM A959 S46910 vs ASTM A240/A240M S44735

Related Material — 62.9% match based on chemical composition and mechanical property overlap.

ASTM A959 S46910 (ASTM A959:2011) and ASTM A240/A240M S44735 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S46910 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A240/A240M S44735 is commonly used for pressure vessels and general applications (plate, sheet and strip). ASTM A959 S46910 is defined under ASTM International, originating from United States, while ASTM A240/A240M S44735 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S46910 vs ASTM A240/A240M S44735 is a 62.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.9%.

Frequently Compared With ASTM A959 S46910:
GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4845 ASTM A959 25-4-4 ASTM A959 2507
Match Breakdown
CHEMISTRY MATCH
62.9%
MECHANICAL MATCH
No shared data
OVERALL
62.9%
Specifications
Property ASTM A959 S46910 ASTM A240/A240M S44735
Standard ASTM A959:2011 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
Al (%) 0.15-0.50 Not specified
C (%) <=0.030 <=0.030
Cr (%) 11.0-13.0 28.0-30.0
Cu (%) 1.5-3.5 Not specified
Mn (%) <=1.00 <=1.00
Mo (%) 3.5-5.0 3.6-4.2
Ni (%) 8.0-10.0 <=1.00
P (%) <=0.030 <=0.040
S (%) <=0.015 <=0.030
Si (%) <=0.70 <=1.00
Ti (%) 0.50-1.20 Not specified
N (%) Not specified <=0.045
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 S46910 ASTM A240/A240M S44735
Tensile Strength Not specified >=550 MPa
Yield Strength Not specified >=415 MPa
Elongation Not specified >=18%
Hardness Not specified <=255 HB
Condition Not specified Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
ASTM A959 S46910
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A240/A240M S44735
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can ASTM A959 S46910 Be Substituted With ASTM A240/A240M S44735?
ASTM A959 S46910 and ASTM A240/A240M S44735 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S46910
0 active listings and RFQs →
ASTM A240/A240M S44735
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S46910 and ASTM A240/A240M S44735?
ASTM A959 S46910 specifies Al, Cu, Ti which are not specified for ASTM A240/A240M S44735. ASTM A240/A240M S44735 specifies N which is not specified for ASTM A959 S46910.
Can ASTM A959 S46910 be substituted with ASTM A240/A240M S44735?
ASTM A959 S46910 and ASTM A240/A240M S44735 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.