Post Stock Login Register

ASTM A959 XM-32 vs ASTM A959 S41428

Close Alternative — 76% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-32 (ASTM A959:2011) and ASTM A959 S41428 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-32 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 S41428 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 XM-32 is defined under ASTM International, originating from United States, while ASTM A959 S41428 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 XM-32 vs ASTM A959 S41428 is a 76% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 76%.

Frequently Compared With ASTM A959 XM-32:
IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 20Cr12MoNiVH IS 1570 (Part 7) 12Cr12MoH EN 10088-1 1.4845 ASTM A959 16-8-2H IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
76%
MECHANICAL MATCH
No shared data
OVERALL
76%
Specifications
Property ASTM A959 XM-32 ASTM A959 S41428
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.08-0.15 0.10-0.17
Cr (%) 11.0-12.5 11.3-12.7
Mn (%) 0.50-0.90 0.65-1.05
Mo (%) 1.50-2.00 1.50-2.00
N (%) 0.01-0.05 0.020-0.045
Ni (%) 2.00-3.00 2.3-3.2
P (%) <=0.025 <=0.020
S (%) <=0.025 <=0.015
Si (%) <=0.35 0.10-0.35
V (%) 0.25-0.40 0.25-0.40
Al (%) Not specified <=0.025
Cu (%) Not specified <=0.15
Sn (%) Not specified <=0.05
Ti (%) Not specified <=0.05
W (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-32
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 S41428
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 XM-32 Be Substituted With ASTM A959 S41428?
ASTM A959 XM-32 and ASTM A959 S41428 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
ASTM A959 XM-32
0 active listings and RFQs →
ASTM A959 S41428
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-32 and ASTM A959 S41428?
ASTM A959 S41428 specifies Al, Cu, Sn, Ti which are not specified for ASTM A959 XM-32.
Can ASTM A959 XM-32 be substituted with ASTM A959 S41428?
ASTM A959 XM-32 and ASTM A959 S41428 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.