Post Stock Login Register

ASTM A959 XM-32 vs EN 10088-1 X12CrNiMoV12-3

Strong Match — 93.3% match based on chemical composition and mechanical property overlap.

ASTM A959 XM-32 (ASTM A959:2011) and EN 10088-1 X12CrNiMoV12-3 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 XM-32 is defined under ASTM International, originating from United States, while EN 10088-1 X12CrNiMoV12-3 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A959 XM-32 vs EN 10088-1 X12CrNiMoV12-3 is a 93.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 93.3%.

Frequently Compared With ASTM A959 XM-32:
IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 20Cr12MoNiVH IS 1570 (Part 7) 12Cr12MoH EN 10088-1 1.4845 ASTM A959 16-8-2H IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
93.3%
MECHANICAL MATCH
No shared data
OVERALL
93.3%
Specifications
Property ASTM A959 XM-32 EN 10088-1 X12CrNiMoV12-3
Standard ASTM A959:2011 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.08-0.15 0.08-0.15
Cr (%) 11.0-12.5 11.0-12.5
Mn (%) 0.50-0.90 0.40-0.90
Mo (%) 1.50-2.00 1.50-2.00
N (%) 0.01-0.05 0.020-0.040
Ni (%) 2.00-3.00 2.00-3.00
P (%) <=0.025 <=0.025
S (%) <=0.025 <=0.015
Si (%) <=0.35 <=0.50
V (%) 0.25-0.40 0.25-0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 XM-32
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
EN 10088-1 X12CrNiMoV12-3
Not documented
Can ASTM A959 XM-32 Be Substituted With EN 10088-1 X12CrNiMoV12-3?
ASTM A959 XM-32 and EN 10088-1 X12CrNiMoV12-3 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12CrNiMoV12-3 is often considered as a substitute for ASTM A959 XM-32 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 XM-32
0 active listings and RFQs →
EN 10088-1 X12CrNiMoV12-3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 XM-32 and EN 10088-1 X12CrNiMoV12-3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 XM-32 be substituted with EN 10088-1 X12CrNiMoV12-3?
ASTM A959 XM-32 and EN 10088-1 X12CrNiMoV12-3 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12CrNiMoV12-3 is often considered as a substitute for ASTM A959 XM-32 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.