Strong Match — 94.9% match
based on chemical composition and mechanical property overlap.
BS 970 (Part 1) 060A78 (BS 970 (Part 1):1991) and BS 970 (Part 1) 060A81 (BS 970 (Part 1):1991) are both steel grades.
Both fall under the Carbon Steel category.
BS 970 (Part 1) 060A78 is typically used for as-rolled, or as-rolled and softened, steel (section two), while BS 970 (Part 1) 060A81 is commonly used for as-rolled, or as-rolled and softened, steel (section two).
BS 970 (Part 1) 060A78 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 060A81 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, BS 970 (Part 1) 060A78 vs BS 970 (Part 1) 060A81 is a 94.9% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 94.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 (Part 1) 060A78
As-rolled, or as-rolled and softened, steel (section two)
BS 970 (Part 1) 060A81
As-rolled, or as-rolled and softened, steel (section two)
Can BS 970 (Part 1) 060A78 Be Substituted With BS 970 (Part 1) 060A81?
BS 970 (Part 1) 060A78 and BS 970 (Part 1) 060A81 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 060A81 is often considered as a substitute for BS 970 (Part 1) 060A78 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between BS 970 (Part 1) 060A78 and BS 970 (Part 1) 060A81?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 (Part 1) 060A78 be substituted with BS 970 (Part 1) 060A81?
BS 970 (Part 1) 060A78 and BS 970 (Part 1) 060A81 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 060A81 is often considered as a substitute for BS 970 (Part 1) 060A78 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.