Post Stock Login Register

BS 970 EN22 vs BS 970 (Part 3) 637M17

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

BS 970 EN22 (BS 970:1955) and BS 970 (Part 3) 637M17 (BS 970 (Part 3):1991) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN22 is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars. suitable for 50/60 (s) and 55/65 (t) tons/sq in according to ruling section., while BS 970 (Part 3) 637M17 is commonly used for bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; alloy case hardening steel (table 15). BS 970 EN22 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 3) 637M17 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN22 vs BS 970 (Part 3) 637M17 is a 69.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With BS 970 EN22:
IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
69.9%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property BS 970 EN22 BS 970 (Part 3) 637M17
Standard BS 970:1955 BS 970 (Part 3):1991
Category Alloy Steel Alloy Steel
C (%) 0.35-0.45 0.14-0.20
Si (%) 0.10-0.35 0.10-0.40
Mn (%) 0.50-0.80 0.60-0.90
Ni (%) 3.25-3.75 0.85-1.25
Cr (%) <=0.30 0.60-1.00
S (%) <=0.050 <=0.05
P (%) <=0.050 <=0.04
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN22 BS 970 (Part 3) 637M17
Tensile Strength ≥772 MPa (50 tons/sq in, converted) Not specified
Yield Strength ≥587 MPa (38 tons/sq in, converted) Not specified
Elongation ≥20% Not specified
Hardness 223-277 HB Not specified
Condition Hardened and tempered S, ruling section 4 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN22
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars. Suitable for 50/60 (S) and 55/65 (T) tons/sq in according to ruling section.
BS 970 (Part 3) 637M17
Bright cold finished bars (cold drawn, turned or precision ground) for general engineering purposes, in straight lengths; alloy case hardening steel (Table 15)
Can BS 970 EN22 Be Substituted With BS 970 (Part 3) 637M17?
BS 970 EN22 and BS 970 (Part 3) 637M17 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 EN22
0 active listings and RFQs →
BS 970 (Part 3) 637M17
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN22 and BS 970 (Part 3) 637M17?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN22 be substituted with BS 970 (Part 3) 637M17?
BS 970 EN22 and BS 970 (Part 3) 637M17 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.