Post Stock Login Register

BS 970 EN22 vs SAE J404 50B46

Related Material — 69.3% match based on chemical composition and mechanical property overlap.

BS 970 EN22 (BS 970:1955) and SAE J404 50B46 (SAE J404:2009) are both steel grades. Both fall under the Alloy Steel category. BS 970 EN22 is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars. suitable for 50/60 (s) and 55/65 (t) tons/sq in according to ruling section., while SAE J404 50B46 is commonly used for chemistry-only alloy steel grade; see the composition notes for product scope. BS 970 EN22 is defined under British Standards (BS), originating from United Kingdom, while SAE J404 50B46 is defined under SAE International, originating from United States.

As per chemical composition, BS 970 EN22 vs SAE J404 50B46 is a 69.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.3%.

Frequently Compared With BS 970 EN22:
UNI 11234 100Cr6 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 7) 10Mo6H
Match Breakdown
CHEMISTRY MATCH
69.3%
MECHANICAL MATCH
No shared data
OVERALL
69.3%
Specifications
Property BS 970 EN22 SAE J404 50B46
Standard BS 970:1955 SAE J404:2009
Category Alloy Steel Alloy Steel
C (%) 0.35-0.45 0.44-0.49
Si (%) 0.10-0.35 0.15-0.35
Mn (%) 0.50-0.80 0.75-1.00
Ni (%) 3.25-3.75 0.20-0.35
Cr (%) <=0.30 0.20-0.35
S (%) <=0.050 <=0.040
P (%) <=0.050 <=0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN22 SAE J404 50B46
Tensile Strength ≥772 MPa (50 tons/sq in, converted) Not specified
Yield Strength ≥587 MPa (38 tons/sq in, converted) Not specified
Elongation ≥20% Not specified
Hardness 223-277 HB Not specified
Condition Hardened and tempered S, ruling section 4 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN22
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars. Suitable for 50/60 (S) and 55/65 (T) tons/sq in according to ruling section.
SAE J404 50B46
Chemistry-only alloy steel grade; see the composition notes for product scope
Can BS 970 EN22 Be Substituted With SAE J404 50B46?
BS 970 EN22 and SAE J404 50B46 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 EN22
0 active listings and RFQs →
SAE J404 50B46
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN22 and SAE J404 50B46?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN22 be substituted with SAE J404 50B46?
BS 970 EN22 and SAE J404 50B46 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.