Post Stock Login Register

BS 970 EN2A/1 vs IS 1570 (Part 2/Sec 1) 4C2

Strong Match — 96% match based on chemical composition and mechanical property overlap.

BS 970 EN2A/1 (BS 970:1955) and IS 1570 (Part 2/Sec 1) 4C2 (IS 1570 (Part 2/Sec 1):1979) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN2A/1 is defined under British Standards (BS), originating from United Kingdom, while IS 1570 (Part 2/Sec 1) 4C2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN2A/1 vs IS 1570 (Part 2/Sec 1) 4C2 is a 96% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 96%.

Frequently Compared With BS 970 EN2A/1:
BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 060A40 BS 970 (Part 1) 060A45 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10
Match Breakdown
CHEMISTRY MATCH
96%
MECHANICAL MATCH
No shared data
OVERALL
96%
Specifications
Property BS 970 EN2A/1 IS 1570 (Part 2/Sec 1) 4C2
Standard BS 970:1955 IS 1570 (Part 2/Sec 1):1979
Category Carbon Steel Carbon Steel
C (%) <=0.10 <=0.08
Mn (%) <=0.50 <=0.40
S (%) <=0.040 Not specified
P (%) <=0.040 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN2A/1
Bars and billets for forging; forgings and drop-forgings; bars for machining
IS 1570 (Part 2/Sec 1) 4C2
Not documented
Key Differences
Can BS 970 EN2A/1 Be Substituted With IS 1570 (Part 2/Sec 1) 4C2?
BS 970 EN2A/1 and IS 1570 (Part 2/Sec 1) 4C2 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 2/Sec 1) 4C2 is often considered as a substitute for BS 970 EN2A/1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN2A/1
0 active listings and RFQs →
IS 1570 (Part 2/Sec 1) 4C2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN2A/1 and IS 1570 (Part 2/Sec 1) 4C2?
BS 970 EN2A/1 specifies S, P which are not specified for IS 1570 (Part 2/Sec 1) 4C2.
Can BS 970 EN2A/1 be substituted with IS 1570 (Part 2/Sec 1) 4C2?
BS 970 EN2A/1 and IS 1570 (Part 2/Sec 1) 4C2 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 2/Sec 1) 4C2 is often considered as a substitute for BS 970 EN2A/1 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.