Post Stock Login Register

BS 970 EN2E vs BS 970 (Part 1) 040A04

Strong Match — 86.9% match based on chemical composition and mechanical property overlap.

BS 970 EN2E (BS 970:1955) and BS 970 (Part 1) 040A04 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN2E is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining, while BS 970 (Part 1) 040A04 is commonly used for as-rolled, or as-rolled and softened, steel (section two). BS 970 EN2E is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 040A04 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN2E vs BS 970 (Part 1) 040A04 is a 86.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 86.9%.

Frequently Compared With BS 970 EN2E:
BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A32 BS 970 (Part 1) 060A45 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 040A10 BS 970 (Part 1) 060A40
Match Breakdown
CHEMISTRY MATCH
86.9%
MECHANICAL MATCH
No shared data
OVERALL
86.9%
Specifications
Property BS 970 EN2E BS 970 (Part 1) 040A04
Standard BS 970:1955 BS 970 (Part 1):1991
Category Carbon Steel Carbon Steel
C (%) <=0.15 <=0.08
Si (%) 0.10-0.35 Not specified
Mn (%) <=0.50 0.30-0.50
S (%) <=0.050 Not specified
P (%) <=0.050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN2E BS 970 (Part 1) 040A04
Tensile Strength ≥309 MPa (20 tons/sq in, converted) Not specified
Elongation ≥28% Not specified
Hardness ≤120 HB Not specified
Condition , ruling section 6 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN2E
Bars and billets for forging; forgings and drop-forgings; bars for machining
BS 970 (Part 1) 040A04
As-rolled, or as-rolled and softened, steel (section two)
Key Differences
Can BS 970 EN2E Be Substituted With BS 970 (Part 1) 040A04?
BS 970 EN2E and BS 970 (Part 1) 040A04 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 040A04 is often considered as a substitute for BS 970 EN2E in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN2E
0 active listings and RFQs →
BS 970 (Part 1) 040A04
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN2E and BS 970 (Part 1) 040A04?
BS 970 EN2E specifies Si, S, P which are not specified for BS 970 (Part 1) 040A04.
Can BS 970 EN2E be substituted with BS 970 (Part 1) 040A04?
BS 970 EN2E and BS 970 (Part 1) 040A04 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 040A04 is often considered as a substitute for BS 970 EN2E in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.