Post Stock Login Register

BS 970 EN42B vs IS 3195 60Si7

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

BS 970 EN42B (BS 970:1955) and IS 3195 60Si7 (IS 3195:1992) are both steel grades. Both fall under the Spring Steel category. BS 970 EN42B is defined under British Standards (BS), originating from United Kingdom, while IS 3195 60Si7 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN42B vs IS 3195 60Si7 is a 78.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With BS 970 EN42B:
BS 970 EN42C BS 970 EN42F BS 970 EN42 BS 970 EN42E EN 10083-1 51CrV4 IS 3195 113C6 EN 10089 50CrV4 EN 10083-3 51CrV4 IS 5517 55Cr3 GB/T 1222 55CrMnA IS 4367 55Si7 IS 3431 50Cr4V2
Match Breakdown
CHEMISTRY MATCH
78.3%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property BS 970 EN42B IS 3195 60Si7
Standard BS 970:1955 IS 3195:1992
Category Spring Steel Spring Steel
C (%) 0.60-0.70 0.55-0.65
Si (%) <=0.35 1.50-2.00
Mn (%) 0.55-0.80 0.80-1.00
S (%) <=0.050 <=0.030
P (%) <=0.050 <=0.030
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN42B IS 3195 60Si7
Hardness, annealed Not specified <=245 HB
Hardness, untreated (hot rolled) Not specified about 255 HB (for guidance only)
Typical Applications
BS 970 EN42B
Not documented
IS 3195 60Si7
Used in leaf springs, coil springs, suspension parts, agricultural tines, clips, and spring washers.
Can BS 970 EN42B Be Substituted With IS 3195 60Si7?
BS 970 EN42B and IS 3195 60Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 970 EN42B
No active listings currently.
IS 3195 60Si7
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5700–5800 mm (224.41–228.35 in)
On M-EX Right Now
BS 970 EN42B
0 active listings and RFQs →
IS 3195 60Si7
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN42B and IS 3195 60Si7?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN42B be substituted with IS 3195 60Si7?
BS 970 EN42B and IS 3195 60Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.