Post Stock Login Register

BS 970 EN42B vs IS 4367 55Si7

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

BS 970 EN42B (BS 970:1955) and IS 4367 55Si7 (IS 4367:1991) are both steel grades. Both fall under the Spring Steel category. BS 970 EN42B is defined under British Standards (BS), originating from United Kingdom, while IS 4367 55Si7 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN42B vs IS 4367 55Si7 is a 76.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With BS 970 EN42B:
BS 970 EN42F BS 970 EN42 BS 970 EN42C BS 970 EN42E IS 3195 113C6 EN 10089 50CrV4 EN 10083-1 51CrV4 EN 10083-3 51CrV4 IS 5517 55Cr3 IS 3195 60Si7 GB/T 1222 55CrMnA IS 3431 50Cr4V2
Match Breakdown
CHEMISTRY MATCH
76.1%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property BS 970 EN42B IS 4367 55Si7
Standard BS 970:1955 IS 4367:1991
Category Spring Steel Spring Steel
C (%) 0.60-0.70 0.50-0.60
Si (%) <=0.35 1.50-2.00
Mn (%) 0.55-0.80 0.80-1.00
S (%) <=0.050 <=0.035
P (%) <=0.050 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN42B IS 4367 55Si7
Tensile Strength Not specified 1300-1500 MPa
Hardness Not specified 380-440 HB
Hardness (soft annealed) Not specified <=245 HB
Condition Not specified Hardened and tempered, ruling section up to 100 mm
Can BS 970 EN42B Be Substituted With IS 4367 55Si7?
BS 970 EN42B and IS 4367 55Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 EN42B
0 active listings and RFQs →
IS 4367 55Si7
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN42B and IS 4367 55Si7?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN42B be substituted with IS 4367 55Si7?
BS 970 EN42B and IS 4367 55Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.