Post Stock Login Register

BS 970 EN47 vs IS 3195 52Cr4Mo2V

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

BS 970 EN47 (BS 970:1955) and IS 3195 52Cr4Mo2V (IS 3195:1992) are both steel grades. Both fall under the Spring Steel category. BS 970 EN47 is typically used for coil springs, leaf springs, torsion bars, valve springs, suspension springs, industrial springs requiring high fatigue life., while IS 3195 52Cr4Mo2V is commonly used for volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword). BS 970 EN47 is defined under British Standards (BS), originating from United Kingdom, while IS 3195 52Cr4Mo2V is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN47 vs IS 3195 52Cr4Mo2V is a 70% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With BS 970 EN47:
IS 5517 55Cr3 EN 10089 55Cr3 EN 10083-3 51CrV4 IS 3431 50Cr4V2 EN 10089 50CrV4 EN 10083-1 51CrV4 EN 10083-1 51CrV4 GB/T 1222 55CrMnA IS 3195 50Cr4V2 IS 3431 60Cr4V2 IS 3195 113C6 IS 1570 (Part 4) 55Si7
Match Breakdown
CHEMISTRY MATCH
70%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property BS 970 EN47 IS 3195 52Cr4Mo2V
Standard BS 970:1955 IS 3195:1992
Category Spring Steel Spring Steel
C (%) 0.45-0.55 0.48-0.56
Si (%) <=0.50 0.15-0.40
Mn (%) 0.50-0.80 0.70-1.10
Cr (%) 0.80-1.20 0.90-1.20
V (%) >=0.15 0.07-0.12
S (%) <=0.050 <=0.030
P (%) <=0.050 <=0.030
Mo (%) Not specified 0.15-0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN47 IS 3195 52Cr4Mo2V
Hardness, annealed Not specified <=255 HB
Hardness, untreated (hot rolled) Not specified about 310 HB (for guidance only)
Typical Applications
BS 970 EN47
Coil springs, leaf springs, torsion bars, valve springs, suspension springs, industrial springs requiring high fatigue life.
IS 3195 52Cr4Mo2V
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
Key Differences
Can BS 970 EN47 Be Substituted With IS 3195 52Cr4Mo2V?
BS 970 EN47 and IS 3195 52Cr4Mo2V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 970 EN47
Round Bar → (4 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5700–6400 mm (224.41–251.97 in)
IS 3195 52Cr4Mo2V
No active listings currently.
On M-EX Right Now
BS 970 EN47
4 active listings and RFQs →
IS 3195 52Cr4Mo2V
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN47 and IS 3195 52Cr4Mo2V?
IS 3195 52Cr4Mo2V specifies Mo which is not specified for BS 970 EN47.
Can BS 970 EN47 be substituted with IS 3195 52Cr4Mo2V?
BS 970 EN47 and IS 3195 52Cr4Mo2V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.