Post Stock Login Register

BS 970 EN52 vs IS 1570 (Part 5) X40Cr13

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

BS 970 EN52 (BS 970:1955) and IS 1570 (Part 5) X40Cr13 (IS 1570 (Part 5):1985) are both steel grades. Both fall under the Stainless Steel category. BS 970 EN52 is defined under British Standards (BS), originating from United Kingdom, while IS 1570 (Part 5) X40Cr13 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, BS 970 EN52 vs IS 1570 (Part 5) X40Cr13 is a 71.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With BS 970 EN52:
ASTM A959 .- EN 10088-1 1.4845 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
71.8%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property BS 970 EN52 IS 1570 (Part 5) X40Cr13
Standard BS 970:1955 IS 1570 (Part 5):1985
Category Stainless Steel Stainless Steel
C (%) 0.40-0.50 0.35-0.45
Si (%) 3.00-3.75 <=1.0
Mn (%) 0.30-0.60 <=1.0
Ni (%) <=0.50 <=1.0
Cr (%) 7.50-9.50 12.0-14.0
S (%) <=0.040 <=0.030
P (%) <=0.040 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN52 IS 1570 (Part 5) X40Cr13
Tensile Strength Not specified 600-750 MPa
Hardness Not specified <=225 HB
Condition Not specified Annealed, quenched or solution treated bars and flats (Table 3)
Typical Applications
BS 970 EN52
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.
IS 1570 (Part 5) X40Cr13
Not documented
Can BS 970 EN52 Be Substituted With IS 1570 (Part 5) X40Cr13?
BS 970 EN52 and IS 1570 (Part 5) X40Cr13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 EN52
0 active listings and RFQs →
IS 1570 (Part 5) X40Cr13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN52 and IS 1570 (Part 5) X40Cr13?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN52 be substituted with IS 1570 (Part 5) X40Cr13?
BS 970 EN52 and IS 1570 (Part 5) X40Cr13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.