Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
CSA G40.21 350WT (CSA G40.21-13 (R2023)) and NF A35-565 100C6 are both steel grades.
Both fall under the Alloy Steel category.
CSA G40.21 350WT is typically used for bridges,offshore structures,heavy fabrication,pressure vessels,cranes,structural components, while NF A35-565 100C6 is commonly used for ball bearings, roller bearings, bearing races, rollers, precision tools, wear resistant parts.
CSA G40.21 350WT is defined under Canadian Standards Association (CSA), originating from Canada, while NF A35-565 100C6 is defined under Association Francaise de Normalisation (NF), originating from France.
As per chemical composition, CSA G40.21 350WT vs NF A35-565 100C6 is a 70.7% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
NF A35-565 100C6 specifies Si, Cr which are not specified for CSA G40.21 350WT.
Can CSA G40.21 350WT Be Substituted With NF A35-565 100C6?
CSA G40.21 350WT and NF A35-565 100C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between CSA G40.21 350WT and NF A35-565 100C6?
NF A35-565 100C6 specifies Si, Cr which are not specified for CSA G40.21 350WT.
Can CSA G40.21 350WT be substituted with NF A35-565 100C6?
CSA G40.21 350WT and NF A35-565 100C6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.