Post Stock Login Register

CSA G40.21 480A vs ASTM A588 Grade A

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

CSA G40.21 480A (CSA G40.21-13 (R2023)) and ASTM A588 Grade A (ASTM A588) are both steel grades. Both fall under the Structural Steel (Corten / Weathering) category. CSA G40.21 480A is typically used for high-strength atmospheric corrosion-resistant (weathering) structural steel; heavy exposed structural members, bridge girders, while ASTM A588 Grade A is commonly used for high-strength low-alloy structural steel with atmospheric corrosion resistance (weathering steel); bridges, transmission/communication towers, gusset plates, exposed structural applications. CSA G40.21 480A is defined under Canadian Standards Association (CSA), originating from Canada, while ASTM A588 Grade A is defined under ASTM International, originating from United States.

As per chemical composition, CSA G40.21 480A vs ASTM A588 Grade A is a 80.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With CSA G40.21 480A:
EN 10025-5 S355J2W CSA G40.21 350A EN 10025-5 S355J0WP CSA G40.21 50W EN 10025-5 S355J2WP ASTM A588 JIS G3114 SMA400 AS/NZS 3678 Grade 350WR ASTM A588 Grade B CSA G40.21 260WT ASTM A709 Grade HPS 70W EN 10025-5 S235J2W
Match Breakdown
CHEMISTRY MATCH
80.1%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property CSA G40.21 480A ASTM A588 Grade A
Standard CSA G40.21-13 (R2023) ASTM A588
Category Structural Steel (Corten / Weathering) Structural Steel (Corten / Weathering)
C (%) <=0.23 <=0.19
Mn (%) <=1.60 0.80-1.25
Si (%) <=0.40 0.30-0.65
P (%) <=0.035 <=0.040
S (%) <=0.035 <=0.050
Cu (%) 0.20-0.40 0.25-0.40
Cr (%) 0.40-0.65 0.40-0.65
Ni (%) Not specified <=0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property CSA G40.21 480A ASTM A588 Grade A
Tensile Strength 620-760 MPa 485 MPa min
Yield Strength 480 MPa min 345 MPa min
Elongation 15% min 18% min
Impact 27J at 0°C Not specified
Hardness Not specified 140-190 HB
Typical Applications
CSA G40.21 480A
High-strength atmospheric corrosion-resistant (weathering) structural steel; heavy exposed structural members, bridge girders
ASTM A588 Grade A
High-strength low-alloy structural steel with atmospheric corrosion resistance (weathering steel); bridges, transmission/communication towers, gusset plates, exposed structural applications
Key Differences
Can CSA G40.21 480A Be Substituted With ASTM A588 Grade A?
CSA G40.21 480A and ASTM A588 Grade A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
CSA G40.21 480A
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3400 mm (98.43–133.86 in)
ASTM A588 Grade A
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
CSA G40.21 480A
2 active listings and RFQs →
ASTM A588 Grade A
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between CSA G40.21 480A and ASTM A588 Grade A?
ASTM A588 Grade A specifies Ni which is not specified for CSA G40.21 480A.
Can CSA G40.21 480A be substituted with ASTM A588 Grade A?
CSA G40.21 480A and ASTM A588 Grade A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.