Post Stock Login Register

CSA G40.21 480W vs ASTM A572 Grade 50

Related Material — 61.8% match based on chemical composition and mechanical property overlap.

CSA G40.21 480W (CSA G40.21-13 (R2023)) and ASTM A572 Grade 50 (ASTM A572) are both steel grades. Both fall under the Structural Steel category. CSA G40.21 480W is typically used for heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment., while ASTM A572 Grade 50 is commonly used for high-strength low-alloy structural steel; buildings, bridges, transmission towers, construction equipment, general structural fabrication. CSA G40.21 480W is defined under Canadian Standards Association (CSA), originating from Canada, while ASTM A572 Grade 50 is defined under ASTM International, originating from United States.

As per chemical composition, CSA G40.21 480W vs ASTM A572 Grade 50 is a 92.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 61.8%.

Frequently Compared With CSA G40.21 480W:
AS/NZS 1595 C350 AS/NZS 3679.1 350 AS/NZS 3679.1 300 AS/NZS 1595 C450 CSA G40.21 350W IS 2062 E250A CSA G40.21 400A IS 2062 E250B0 ASTM A1008 SS Grade 80 CSA G40.21 300W GOST 19281 09G2S ASTM A283C
Match Breakdown
CHEMISTRY MATCH
92.7%
MECHANICAL MATCH
0%
OVERALL
61.8%
Specifications
Property CSA G40.21 480W ASTM A572 Grade 50
Standard CSA G40.21-13 (R2023) ASTM A572
Category Structural Steel Structural Steel
C (%) max 0.23 <=0.23
Mn (%) max 1.7 <=1.35
Si (%) max 0.5 <=0.40
P (%) max 0.035 <=0.040
S (%) max 0.035 <=0.050
Nb (%) Not specified <=0.05
V (%) Not specified <=0.15
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property CSA G40.21 480W ASTM A572 Grade 50
Yield Strength 480 MPa min 345 MPa min
Tensile Strength 590-790 MPa 450 MPa min
Elongation Not specified 18% min
Hardness Not specified 137-187 HB
Typical Applications
CSA G40.21 480W
Heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment.
ASTM A572 Grade 50
High-strength low-alloy structural steel; buildings, bridges, transmission towers, construction equipment, general structural fabrication
Key Differences
Can CSA G40.21 480W Be Substituted With ASTM A572 Grade 50?
CSA G40.21 480W and ASTM A572 Grade 50 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
CSA G40.21 480W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3000 mm (114.17–118.11 in)
ASTM A572 Grade 50
Plate → (4 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2800–4600 mm (110.24–181.1 in)
On M-EX Right Now
CSA G40.21 480W
2 active listings and RFQs →
ASTM A572 Grade 50
4 active listings and RFQs →
Frequently Asked Questions
What is the difference between CSA G40.21 480W and ASTM A572 Grade 50?
ASTM A572 Grade 50 specifies Nb, V which are not specified for CSA G40.21 480W.
Can CSA G40.21 480W be substituted with ASTM A572 Grade 50?
CSA G40.21 480W and ASTM A572 Grade 50 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.