Post Stock Login Register

DIN 17200 40NiCrMo6 vs IS 1570 (Part 7) 10Cr36Mo10H

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

DIN 17200 40NiCrMo6 (DIN 17200:1986) and IS 1570 (Part 7) 10Cr36Mo10H (IS 1570 (Part 7):1992) are both steel grades. Both fall under the Alloy Steel category. DIN 17200 40NiCrMo6 is typically used for heavy forgings, crankshafts, high strength components, while IS 1570 (Part 7) 10Cr36Mo10H is commonly used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature. DIN 17200 40NiCrMo6 is defined under Deutsches Institut fur Normung (DIN), originating from Germany, while IS 1570 (Part 7) 10Cr36Mo10H is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, DIN 17200 40NiCrMo6 vs IS 1570 (Part 7) 10Cr36Mo10H is a 53.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With DIN 17200 40NiCrMo6:
UNI 11234 100Cr6 GOST 4543 12HN3A NF A35-565 100C6 GB/T 3077 12Cr2Ni4A IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr4 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
53.7%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property DIN 17200 40NiCrMo6 IS 1570 (Part 7) 10Cr36Mo10H
Standard DIN 17200:1986 IS 1570 (Part 7):1992
Category Alloy Steel Alloy Steel
C (%) 0.36–0.44 <=0.15
Mn (%) 0.50–0.80 0.30-0.60
Cr (%) 0.60–1.00 8.00-10.00
Mo (%) 0.15–0.30 0.90-1.10
Ni (%) 1.30–1.70 Not specified
Si (%) Not specified 0.25-1.0
P (%) Not specified <=0.040
S (%) Not specified <=0.030
Al (metallic) (%) Not specified <=0.02
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property DIN 17200 40NiCrMo6 IS 1570 (Part 7) 10Cr36Mo10H
Tensile Strength 900–1100 MPa 410-560 MPa
Yield Strength ≥720 MPa >=135 MPa (0.2 % proof stress)
Elongation ≥12% >=20%
Condition Not specified Pipes, A, thickness - (first row of Table 3)
Typical Applications
DIN 17200 40NiCrMo6
Heavy forgings, crankshafts, high strength components
IS 1570 (Part 7) 10Cr36Mo10H
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
Key Differences
Can DIN 17200 40NiCrMo6 Be Substituted With IS 1570 (Part 7) 10Cr36Mo10H?
DIN 17200 40NiCrMo6 and IS 1570 (Part 7) 10Cr36Mo10H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
DIN 17200 40NiCrMo6
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5500–6900 mm (216.54–271.65 in)
IS 1570 (Part 7) 10Cr36Mo10H
No active listings currently.
On M-EX Right Now
DIN 17200 40NiCrMo6
2 active listings and RFQs →
IS 1570 (Part 7) 10Cr36Mo10H
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between DIN 17200 40NiCrMo6 and IS 1570 (Part 7) 10Cr36Mo10H?
DIN 17200 40NiCrMo6 specifies Ni which is not specified for IS 1570 (Part 7) 10Cr36Mo10H. IS 1570 (Part 7) 10Cr36Mo10H specifies Si, P, S, Al (metallic) which are not specified for DIN 17200 40NiCrMo6.
Can DIN 17200 40NiCrMo6 be substituted with IS 1570 (Part 7) 10Cr36Mo10H?
DIN 17200 40NiCrMo6 and IS 1570 (Part 7) 10Cr36Mo10H share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.