Post Stock Login Register

EN 10025-2 S500J0 vs CSA G40.21 400W

Related Material — 67.4% match based on chemical composition and mechanical property overlap.

EN 10025-2 S500J0 (EN 10025-2:2019) and CSA G40.21 400W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. EN 10025-2 S500J0 is typically used for hot rolled products of structural steels, while CSA G40.21 400W is commonly used for heavy structural fabrication, bridges, offshore platforms, cranes, pressure vessels, mining equipment.. EN 10025-2 S500J0 is defined under European Standard (EN), originating from Europe, while CSA G40.21 400W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, EN 10025-2 S500J0 vs CSA G40.21 400W is a 89.7% match. As per mechanical properties, the match is 22.9%. Combined, this makes them a related material overall at 67.4%.

Frequently Compared With EN 10025-2 S500J0:
CSA G40.21 480W CSA G40.21 400A ASTM A283C GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
89.7%
MECHANICAL MATCH
22.9%
OVERALL
67.4%
Specifications
Property EN 10025-2 S500J0 CSA G40.21 400W
Standard EN 10025-2:2019 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.20 max 0.23
Si (%) <=0.55 max 0.5
Mn (%) <=1.70 max 1.6
P (%) <=0.030 max 0.035
S (%) <=0.030 max 0.035
N (%) <=0.025 Not specified
Cu (%) <=0.55 Not specified
Nb (%) <=0.05 Not specified
V (%) <=0.13 Not specified
Ti (%) <=0.05 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 S500J0 CSA G40.21 400W
Tensile Strength 580-760 MPa 520-690 MPa
Yield Strength >=500 MPa 400 MPa min
Elongation >=15% Not specified
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Not specified
Typical Applications
EN 10025-2 S500J0
Hot rolled products of structural steels
CSA G40.21 400W
Heavy structural fabrication, bridges, offshore platforms, cranes, pressure vessels, mining equipment.
Key Differences
Can EN 10025-2 S500J0 Be Substituted With CSA G40.21 400W?
EN 10025-2 S500J0 and CSA G40.21 400W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-2 S500J0
No active listings currently.
CSA G40.21 400W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–5200 mm (98.43–204.72 in)
On M-EX Right Now
EN 10025-2 S500J0
0 active listings and RFQs →
CSA G40.21 400W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 S500J0 and CSA G40.21 400W?
EN 10025-2 S500J0 specifies N, Cu, Nb, V which are not specified for CSA G40.21 400W.
Can EN 10025-2 S500J0 be substituted with CSA G40.21 400W?
EN 10025-2 S500J0 and CSA G40.21 400W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.