Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
EN 10025-3 S355N (EN 10025-3:2019) and CSA G40.21 300W (CSA G40.21-13 (R2023)) are both steel grades.
Both fall under the Structural Steel category.
EN 10025-3 S355N is defined under European Standard (EN), originating from Europe, while CSA G40.21 300W is defined under Canadian Standards Association (CSA), originating from Canada.
As per chemical composition, EN 10025-3 S355N vs CSA G40.21 300W is a 58% match.
As per mechanical properties, the match is 27.8%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10025-3 S355N
CSA G40.21 300W
Tensile Strength
470-630 MPa
450-620 MPa
Yield Strength
>=355 MPa
300 MPa min
Elongation
>=22%
20-23 %
Condition
Normalized or normalized rolled (N), nominal thickness up to 16 mm (tensile strength up to 100 mm), Table 4
EN 10025-3 S355N specifies Si, Nb, V, Ni which are not specified for CSA G40.21 300W.
Can EN 10025-3 S355N Be Substituted With CSA G40.21 300W?
EN 10025-3 S355N and CSA G40.21 300W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10025-3 S355N and CSA G40.21 300W?
EN 10025-3 S355N specifies Si, Nb, V, Ni which are not specified for CSA G40.21 300W.
Can EN 10025-3 S355N be substituted with CSA G40.21 300W?
EN 10025-3 S355N and CSA G40.21 300W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.