Post Stock Login Register

EN 10025-5 S235J0W vs EN 10025-5 S355J0W

Related Material — 63.4% match based on chemical composition and mechanical property overlap.

EN 10025-5 S235J0W (EN 10025-5:2019) and EN 10025-5 S355J0W (EN 10025-5:2019) are both steel grades. Both fall under the Structural Steel (Corten / Weathering) category. EN 10025-5 S235J0W is defined under European Standard (EN), originating from Europe, while EN 10025-5 S355J0W is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10025-5 S235J0W vs EN 10025-5 S355J0W is a 92.6% match. As per mechanical properties, the match is 4.9%. Combined, this makes them a related material overall at 63.4%.

Frequently Compared With EN 10025-5 S235J0W:
EN 10025-5 S355K2W EN 10025-5 S420K2W EN 10025-5 S460J2W CSA G40.21 260WT CSA G40.21 480A ASTM A588 ASTM A588 Grade A ASTM A588 Grade B ASTM A709 Grade HPS 70W AS/NZS 3678 Grade 350WR EN 10025-5 S235J2W EN 10025-5 S355J2W
Match Breakdown
CHEMISTRY MATCH
92.6%
MECHANICAL MATCH
4.9%
OVERALL
63.4%
Specifications
Property EN 10025-5 S235J0W EN 10025-5 S355J0W
Standard EN 10025-5:2019 EN 10025-5:2019
Category Structural Steel (Corten / Weathering) Structural Steel (Corten / Weathering)
C (%) <=0.13 <=0.16
Si (%) <=0.40 <=0.50
Mn (%) 0.20-0.60 0.50-1.50
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
N (%) <=0.012 <=0.012
Cr (%) 0.40-0.80 0.40-0.80
Cu (%) 0.25-0.55 0.25-0.55
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-5 S235J0W EN 10025-5 S355J0W
Tensile Strength 360-510 MPa 470-630 MPa
Yield Strength >=235 MPa >=355 MPa
Elongation >=26% >=22%
Condition Nominal thickness up to 16 mm for yield, 3 to 100 mm for tensile, 3 to 40 mm for elongation (Lo = 5.65 sqrt(S0), longitudinal); transverse values are lower, see blocks Nominal thickness up to 16 mm for yield, 3 to 100 mm for tensile, 3 to 40 mm for elongation (Lo = 5.65 sqrt(S0), longitudinal); transverse values are lower, see blocks
Can EN 10025-5 S235J0W Be Substituted With EN 10025-5 S355J0W?
EN 10025-5 S235J0W and EN 10025-5 S355J0W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10025-5 S235J0W
0 active listings and RFQs →
EN 10025-5 S355J0W
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-5 S235J0W and EN 10025-5 S355J0W?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10025-5 S235J0W be substituted with EN 10025-5 S355J0W?
EN 10025-5 S235J0W and EN 10025-5 S355J0W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.