Post Stock Login Register

EN 10028-2 20MnMoNi4-5 vs IS 4367 07Cr4Mo6

Minimal Match — 34.7% match based on chemical composition and mechanical property overlap.

EN 10028-2 20MnMoNi4-5 (EN 10028-2:2017) and IS 4367 07Cr4Mo6 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. EN 10028-2 20MnMoNi4-5 is defined under European Standard (EN), originating from Europe, while IS 4367 07Cr4Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10028-2 20MnMoNi4-5 vs IS 4367 07Cr4Mo6 is a 52.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 34.7%.

Frequently Compared With EN 10028-2 20MnMoNi4-5:
IS 4367 10Cr9Mo10 IS 1570 (Part 4) 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 EN 10028-2 10CrMo9-10 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 4) 103Cr4
Match Breakdown
CHEMISTRY MATCH
52.1%
MECHANICAL MATCH
0%
OVERALL
34.7%
Specifications
Property EN 10028-2 20MnMoNi4-5 IS 4367 07Cr4Mo6
Standard EN 10028-2:2017 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.15-0.23 <=0.12
Si (%) <=0.40 0.15-0.60
Mn (%) 1.00-1.50 0.40-0.70
P (%) <=0.020 <=0.035
S (%) <=0.010 <=0.035
N (%) <=0.012 Not specified
Cr (%) <=0.20 0.70-1.10
Cu (%) <=0.20 Not specified
Mo (%) 0.45-0.60 0.45-0.65
Ni (%) 0.40-0.80 <=0.30
V (%) <=0.02 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10028-2 20MnMoNi4-5 IS 4367 07Cr4Mo6
Tensile Strength 590-750 MPa 380-550 MPa
Yield Strength >=470 MPa 225 MPa min
Elongation >=18% >=19%
Condition Usual delivery condition quenched and tempered (+QT), nominal thickness up to 40 mm; transverse direction, Yield Strength is ReH, Elongation is A Normalised and tempered, ruling section up to 40 mm
Izod Impact Not specified 60 J min
Hardness (soft annealed) Not specified <=170 HB
Typical Applications
EN 10028-2 20MnMoNi4-5
Flat products for pressure purposes
IS 4367 07Cr4Mo6
Not documented
Key Differences
Can EN 10028-2 20MnMoNi4-5 Be Substituted With IS 4367 07Cr4Mo6?
EN 10028-2 20MnMoNi4-5 and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10028-2 20MnMoNi4-5
0 active listings and RFQs →
IS 4367 07Cr4Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10028-2 20MnMoNi4-5 and IS 4367 07Cr4Mo6?
EN 10028-2 20MnMoNi4-5 specifies N, Cu, V which are not specified for IS 4367 07Cr4Mo6.
Can EN 10028-2 20MnMoNi4-5 be substituted with IS 4367 07Cr4Mo6?
EN 10028-2 20MnMoNi4-5 and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.