Post Stock Login Register

EN 10028-2 P355GH vs EN 10028-2 P295GH

Related Material — 65% match based on chemical composition and mechanical property overlap.

EN 10028-2 P355GH (EN 10028-2:2017) and EN 10028-2 P295GH (EN 10028-2:2017) are both steel grades. Both fall under the Carbon Steel category. EN 10028-2 P355GH is typically used for flat products for pressure purposes, while EN 10028-2 P295GH is commonly used for flat products for pressure purposes. EN 10028-2 P355GH is defined under European Standard (EN), originating from Europe, while EN 10028-2 P295GH is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10028-2 P355GH vs EN 10028-2 P295GH is a 91.4% match. As per mechanical properties, the match is 12.3%. Combined, this makes them a related material overall at 65%.

Frequently Compared With EN 10028-2 P355GH:
BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 060A40
Match Breakdown
CHEMISTRY MATCH
91.4%
MECHANICAL MATCH
12.3%
OVERALL
65%
Specifications
Property EN 10028-2 P355GH EN 10028-2 P295GH
Standard EN 10028-2:2017 EN 10028-2:2017
Category Carbon Steel Carbon Steel
C (%) 0.10-0.22 0.08-0.20
Si (%) <=0.60 <=0.40
Mn (%) 1.10-1.70 0.90-1.50
P (%) <=0.025 <=0.025
S (%) <=0.010 <=0.010
Nb (%) <=0.040 <=0.030
Al (%) >=0.020 >=0.020
N (%) <=0.012 <=0.012
Cr (%) <=0.30 <=0.30
Cu (%) <=0.30 <=0.30
Mo (%) <=0.08 <=0.08
Ni (%) <=0.30 <=0.30
Ti (%) <=0.03 <=0.03
V (%) <=0.02 <=0.02
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10028-2 P355GH EN 10028-2 P295GH
Tensile Strength 510-650 MPa 460-580 MPa
Yield Strength >=355 MPa >=295 MPa
Elongation >=20% >=21%
Condition Usual delivery condition normalized (+N), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A Usual delivery condition normalized (+N), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
EN 10028-2 P355GH
Flat products for pressure purposes
EN 10028-2 P295GH
Flat products for pressure purposes
Can EN 10028-2 P355GH Be Substituted With EN 10028-2 P295GH?
EN 10028-2 P355GH and EN 10028-2 P295GH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10028-2 P355GH
0 active listings and RFQs →
EN 10028-2 P295GH
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10028-2 P355GH and EN 10028-2 P295GH?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10028-2 P355GH be substituted with EN 10028-2 P295GH?
EN 10028-2 P355GH and EN 10028-2 P295GH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.