Post Stock Login Register

EN 10028-3 P355N vs ASTM A537/A537M Class 1

Related Material — 65% match based on chemical composition and mechanical property overlap.

EN 10028-3 P355N (EN 10028-3:2017) and ASTM A537/A537M Class 1 (ASTM A537/A537M:2013) are both steel grades. EN 10028-3 P355N is classified under Alloy Steel, while ASTM A537/A537M Class 1 is classified under Carbon Steel — a different category, which is worth noting alongside the chemistry match below. EN 10028-3 P355N is typically used for flat products for pressure equipment, while ASTM A537/A537M Class 1 is commonly used for fusion welded pressure vessels and structures. EN 10028-3 P355N is defined under European Standard (EN), originating from Europe, while ASTM A537/A537M Class 1 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10028-3 P355N vs ASTM A537/A537M Class 1 is a 73.8% match. As per mechanical properties, the match is 63.2%. Combined, this makes them a related material overall at 65%.

Frequently Compared With EN 10028-3 P355N:
IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
73.8%
MECHANICAL MATCH
63.2%
OVERALL
65%
Specifications
Property EN 10028-3 P355N ASTM A537/A537M Class 1
Standard EN 10028-3:2017 ASTM A537/A537M:2013
Category Alloy Steel Carbon Steel
C (%) <=0.18 <=0.24
Si (%) <=0.50 0.15-0.50
Mn (%) 1.10-1.70 0.70-1.35
P (%) <=0.025 <=0.025
S (%) <=0.010 <=0.025
Al (%) >=0.020 Not specified
N (%) <=0.012 Not specified
Cr (%) <=0.30 <=0.25
Cu (%) <=0.30 <=0.35
Mo (%) <=0.08 <=0.08
Nb (%) <=0.05 Not specified
Ni (%) <=0.50 <=0.25
Ti (%) <=0.03 Not specified
V (%) <=0.10 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10028-3 P355N ASTM A537/A537M Class 1
Tensile Strength 490-630 MPa 485-620 MPa
Yield Strength >=355 MPa >=345 MPa
Elongation >=22% >=22%
Condition Normalized, nominal thickness up to 16 mm Normalized, thickness 65 mm and under; elongation in 50 mm gauge length
Typical Applications
EN 10028-3 P355N
Flat products for pressure equipment
ASTM A537/A537M Class 1
Fusion welded pressure vessels and structures
Key Differences
Can EN 10028-3 P355N Be Substituted With ASTM A537/A537M Class 1?
EN 10028-3 P355N and ASTM A537/A537M Class 1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10028-3 P355N
0 active listings and RFQs →
ASTM A537/A537M Class 1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10028-3 P355N and ASTM A537/A537M Class 1?
Different category: EN 10028-3 P355N is Alloy Steel, ASTM A537/A537M Class 1 is Carbon Steel. EN 10028-3 P355N specifies Al, N, Nb, Ti which are not specified for ASTM A537/A537M Class 1.
Can EN 10028-3 P355N be substituted with ASTM A537/A537M Class 1?
EN 10028-3 P355N and ASTM A537/A537M Class 1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.