Post Stock Login Register

EN 10028-3 P460NH vs EN 10028-2 15NiCuMoNb5-6-4

Related Material — 69.6% match based on chemical composition and mechanical property overlap.

EN 10028-3 P460NH (EN 10028-3:2017) and EN 10028-2 15NiCuMoNb5-6-4 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. EN 10028-3 P460NH is typically used for flat products for pressure equipment, while EN 10028-2 15NiCuMoNb5-6-4 is commonly used for flat products for pressure purposes. EN 10028-3 P460NH is defined under European Standard (EN), originating from Europe, while EN 10028-2 15NiCuMoNb5-6-4 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10028-3 P460NH vs EN 10028-2 15NiCuMoNb5-6-4 is a 61.6% match. As per mechanical properties, the match is 85.7%. Combined, this makes them a related material overall at 69.6%.

Frequently Compared With EN 10028-3 P460NH:
IS 4367 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10 IS 1570 (Part 4) 10Mo6 IS 1570 (Part 4) 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 4) 103Cr4
Match Breakdown
CHEMISTRY MATCH
61.6%
MECHANICAL MATCH
85.7%
OVERALL
69.6%
Specifications
Property EN 10028-3 P460NH EN 10028-2 15NiCuMoNb5-6-4
Standard EN 10028-3:2017 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) <=0.20 <=0.17
Si (%) <=0.60 0.25-0.50
Mn (%) 1.10-1.70 0.80-1.20
P (%) <=0.025 <=0.025
S (%) <=0.010 <=0.010
Al (%) >=0.020 >=0.015
N (%) <=0.025 <=0.020
Cr (%) <=0.30 <=0.30
Cu (%) <=0.70 0.50-0.80
Mo (%) <=0.10 0.25-0.50
Nb (%) <=0.05 0.015-0.045
Ni (%) <=0.80 1.00-1.30
Ti (%) <=0.03 Not specified
V (%) <=0.20 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10028-3 P460NH EN 10028-2 15NiCuMoNb5-6-4
Tensile Strength 570-730 MPa 610-780 MPa
Yield Strength >=460 MPa >=460 MPa
Elongation >=16% >=16%
Condition Normalized, nominal thickness up to 16 mm Usual delivery condition normalized and tempered (+NT), nominal thickness up to 40 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
EN 10028-3 P460NH
Flat products for pressure equipment
EN 10028-2 15NiCuMoNb5-6-4
Flat products for pressure purposes
Key Differences
Can EN 10028-3 P460NH Be Substituted With EN 10028-2 15NiCuMoNb5-6-4?
EN 10028-3 P460NH and EN 10028-2 15NiCuMoNb5-6-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10028-3 P460NH
0 active listings and RFQs →
EN 10028-2 15NiCuMoNb5-6-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10028-3 P460NH and EN 10028-2 15NiCuMoNb5-6-4?
EN 10028-3 P460NH specifies Ti, V which are not specified for EN 10028-2 15NiCuMoNb5-6-4.
Can EN 10028-3 P460NH be substituted with EN 10028-2 15NiCuMoNb5-6-4?
EN 10028-3 P460NH and EN 10028-2 15NiCuMoNb5-6-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.