Strong Match — 87.7% match
based on chemical composition and mechanical property overlap.
EN 10084 20MnCr5 (EN 10084:2008) and GB/T 3077 20CrMnTi (GB/T 3077:2015) are both steel grades.
Both fall under the Alloy Steel category.
EN 10084 20MnCr5 is typically used for gears, shafts, cams, case hardened parts, while GB/T 3077 20CrMnTi is commonly used for gears, transmission shafts, pinions, carburized components, automotive parts.
EN 10084 20MnCr5 is defined under European Standard (EN), originating from Europe, while GB/T 3077 20CrMnTi is defined under Guobiao Standards (GB/T), originating from China.
As per chemical composition, EN 10084 20MnCr5 vs GB/T 3077 20CrMnTi is a 81.6% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 87.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10084 20MnCr5
GB/T 3077 20CrMnTi
Condition
Soft annealed
Quenched and tempered, test sample 15 mm; hardness is for bars delivered annealed or high temperature tempered
Hardenability
+H band at 1.5 mm from the quenched end: 41 to 49 HRC
Not specified
Hardness
Soft annealed: 217 HB max
<=217 HB
Tensile Strength
Not specified
>=1080 MPa
Yield Strength
Not specified
>=850 MPa
Elongation
Not specified
>=10%
Typical Applications
EN 10084 20MnCr5
Gears, shafts, cams, case hardened parts
GB/T 3077 20CrMnTi
gears, transmission shafts, pinions, carburized components, automotive parts
Key Differences
GB/T 3077 20CrMnTi specifies Ti, Cu which are not specified for EN 10084 20MnCr5.
Can EN 10084 20MnCr5 Be Substituted With GB/T 3077 20CrMnTi?
EN 10084 20MnCr5 and GB/T 3077 20CrMnTi overlap closely enough on chemistry and mechanical properties that GB/T 3077 20CrMnTi is often considered as a substitute for EN 10084 20MnCr5 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10084 20MnCr5 and GB/T 3077 20CrMnTi?
GB/T 3077 20CrMnTi specifies Ti, Cu which are not specified for EN 10084 20MnCr5.
Can EN 10084 20MnCr5 be substituted with GB/T 3077 20CrMnTi?
EN 10084 20MnCr5 and GB/T 3077 20CrMnTi overlap closely enough on chemistry and mechanical properties that GB/T 3077 20CrMnTi is often considered as a substitute for EN 10084 20MnCr5 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.