Post Stock Login Register

EN 10085 41CrAlMo7 vs EN 10028-2 10CrMo9-10

Minimal Match — 37.5% match based on chemical composition and mechanical property overlap.

EN 10085 41CrAlMo7 (EN 10085:2001) and EN 10028-2 10CrMo9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. EN 10085 41CrAlMo7 is typically used for nitrided precision components, crankshafts, gears, while EN 10028-2 10CrMo9-10 is commonly used for flat products for pressure purposes. EN 10085 41CrAlMo7 is defined under European Standard (EN), originating from Europe, while EN 10028-2 10CrMo9-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10085 41CrAlMo7 vs EN 10028-2 10CrMo9-10 is a 56.3% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 37.5%.

Frequently Compared With EN 10085 41CrAlMo7:
GOST 4543 12HN3A GB/T 3077 12Cr2Ni4A NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 07Cr4Mo6
Match Breakdown
CHEMISTRY MATCH
56.3%
MECHANICAL MATCH
0%
OVERALL
37.5%
Specifications
Property EN 10085 41CrAlMo7 EN 10028-2 10CrMo9-10
Standard EN 10085:2001 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.38–0.45 0.08-0.14
Mn (%) 0.40–0.70 0.40-0.80
Cr (%) 1.40–1.80 2.00-2.50
Mo (%) 0.15–0.25 0.90-1.10
Al (%) 0.85–1.20 Not specified
Si (%) Not specified <=0.50
P (%) Not specified <=0.020
S (%) Not specified <=0.010
N (%) Not specified <=0.012
Cu (%) Not specified <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10085 41CrAlMo7 EN 10028-2 10CrMo9-10
Tensile Strength 850–1000 MPa 480-630 MPa
Surface Hardness HV ≥900 (nitrided) Not specified
Core Hardness HB 248–302 Not specified
Yield Strength Not specified >=310 MPa
Elongation Not specified >=18%
Condition Not specified Usual delivery condition normalized and tempered (+NT), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
EN 10085 41CrAlMo7
Nitrided precision components, crankshafts, gears
EN 10028-2 10CrMo9-10
Flat products for pressure purposes
Key Differences
Can EN 10085 41CrAlMo7 Be Substituted With EN 10028-2 10CrMo9-10?
EN 10085 41CrAlMo7 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10085 41CrAlMo7
Round Bar → (4 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6300–6500 mm (248.03–255.91 in)
EN 10028-2 10CrMo9-10
No active listings currently.
On M-EX Right Now
EN 10085 41CrAlMo7
4 active listings and RFQs →
EN 10028-2 10CrMo9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10085 41CrAlMo7 and EN 10028-2 10CrMo9-10?
EN 10085 41CrAlMo7 specifies Al which is not specified for EN 10028-2 10CrMo9-10. EN 10028-2 10CrMo9-10 specifies Si, P, S, N which are not specified for EN 10085 41CrAlMo7.
Can EN 10085 41CrAlMo7 be substituted with EN 10028-2 10CrMo9-10?
EN 10085 41CrAlMo7 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.