Post Stock Login Register

EN 10088-1 X12CrNiWTiB16-13 vs EN 10088-1 X8CrNiNb16-13

Related Material — 67.4% match based on chemical composition and mechanical property overlap.

EN 10088-1 X12CrNiWTiB16-13 (EN 10088-1:2014) and EN 10088-1 X8CrNiNb16-13 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X12CrNiWTiB16-13 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X8CrNiNb16-13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X12CrNiWTiB16-13 vs EN 10088-1 X8CrNiNb16-13 is a 67.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.4%.

Frequently Compared With EN 10088-1 X12CrNiWTiB16-13:
IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
67.4%
MECHANICAL MATCH
No shared data
OVERALL
67.4%
Specifications
Property EN 10088-1 X12CrNiWTiB16-13 EN 10088-1 X8CrNiNb16-13
Standard EN 10088-1:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.07-0.15 0.04-0.10
Si (%) <=0.50 0.30-0.60
Mn (%) <=1.50 <=1.50
P (%) <=0.035 <=0.035
S (%) <=0.015 <=0.015
Cr (%) 15.5-17.5 15.0-17.0
Ni (%) 12.5-14.5 12.0-14.0
Ti (%) 0.40-0.70 Not specified
W (%) 2.50-3.00 Not specified
B (%) 0.0015-0.0060 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X12CrNiWTiB16-13 Be Substituted With EN 10088-1 X8CrNiNb16-13?
EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X8CrNiNb16-13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X12CrNiWTiB16-13
0 active listings and RFQs →
EN 10088-1 X8CrNiNb16-13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X8CrNiNb16-13?
EN 10088-1 X12CrNiWTiB16-13 specifies Ti, W, B which are not specified for EN 10088-1 X8CrNiNb16-13.
Can EN 10088-1 X12CrNiWTiB16-13 be substituted with EN 10088-1 X8CrNiNb16-13?
EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X8CrNiNb16-13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.