Post Stock Login Register

EN 10088-1 X12CrNiWTiB16-13 vs EN 10088-1 X12CrNiWTiB16-13

Strong Match — 100% match based on chemical composition and mechanical property overlap.

EN 10088-1 X12CrNiWTiB16-13 (EN 10088-1:2014) and EN 10088-1 X12CrNiWTiB16-13 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X12CrNiWTiB16-13 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X12CrNiWTiB16-13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X12CrNiWTiB16-13 vs EN 10088-1 X12CrNiWTiB16-13 is a 100% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 100%.

Frequently Compared With EN 10088-1 X12CrNiWTiB16-13:
IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
No shared data
OVERALL
100%
Specifications
Property EN 10088-1 X12CrNiWTiB16-13 EN 10088-1 X12CrNiWTiB16-13
Standard EN 10088-1:2014 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.07-0.15 0.07-0.15
Si (%) <=0.50 <=0.50
Mn (%) <=1.50 <=1.50
P (%) <=0.035 <=0.035
S (%) <=0.015 <=0.015
Cr (%) 15.5-17.5 15.5-17.5
Ni (%) 12.5-14.5 12.5-14.5
Ti (%) 0.40-0.70 0.40-0.70
W (%) 2.50-3.00 2.50-3.00
B (%) 0.0015-0.0060 0.0015-0.0060
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can EN 10088-1 X12CrNiWTiB16-13 Be Substituted With EN 10088-1 X12CrNiWTiB16-13?
EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X12CrNiWTiB16-13 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12CrNiWTiB16-13 is often considered as a substitute for EN 10088-1 X12CrNiWTiB16-13 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X12CrNiWTiB16-13
0 active listings and RFQs →
EN 10088-1 X12CrNiWTiB16-13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X12CrNiWTiB16-13?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X12CrNiWTiB16-13 be substituted with EN 10088-1 X12CrNiWTiB16-13?
EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X12CrNiWTiB16-13 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12CrNiWTiB16-13 is often considered as a substitute for EN 10088-1 X12CrNiWTiB16-13 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.