Post Stock Login Register

EN 10088-1 X5CrNiN19-9 vs ASTM A276/A276M S30400

Strong Match — 91% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNiN19-9 (EN 10088-1:2014) and ASTM A276/A276M S30400 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNiN19-9 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M S30400 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X5CrNiN19-9 vs ASTM A276/A276M S30400 is a 91% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 91%.

Frequently Compared With EN 10088-1 X5CrNiN19-9:
GB/T 3280 06Cr19Ni10 ASTM A959 .- GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoH GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
91%
MECHANICAL MATCH
No shared data
OVERALL
91%
Specifications
Property EN 10088-1 X5CrNiN19-9 ASTM A276/A276M S30400
Standard EN 10088-1:2014 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.06 <=0.08
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 18.0-20.0 18.0-20.0
Ni (%) 8.0-11.0 8.0-11.0
N (%) 0.12-0.22 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNiN19-9 ASTM A276/A276M S30400
Tensile Strength Not specified >=515 MPa
Yield Strength Not specified >=205 MPa
Elongation Not specified >=40%
Condition Not specified Condition A (Annealed), hot-finished, all sizes (first row printed)
Typical Applications
EN 10088-1 X5CrNiN19-9
Not documented
ASTM A276/A276M S30400
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can EN 10088-1 X5CrNiN19-9 Be Substituted With ASTM A276/A276M S30400?
EN 10088-1 X5CrNiN19-9 and ASTM A276/A276M S30400 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S30400 is often considered as a substitute for EN 10088-1 X5CrNiN19-9 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X5CrNiN19-9
0 active listings and RFQs →
ASTM A276/A276M S30400
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNiN19-9 and ASTM A276/A276M S30400?
EN 10088-1 X5CrNiN19-9 specifies N which is not specified for ASTM A276/A276M S30400.
Can EN 10088-1 X5CrNiN19-9 be substituted with ASTM A276/A276M S30400?
EN 10088-1 X5CrNiN19-9 and ASTM A276/A276M S30400 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S30400 is often considered as a substitute for EN 10088-1 X5CrNiN19-9 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.