Post Stock Login Register

EN 10088-1 X12CrMnNiN17-7-5 vs ASTM A276/A276M S20100

Strong Match — 96.8% match based on chemical composition and mechanical property overlap.

EN 10088-1 X12CrMnNiN17-7-5 (EN 10088-1:2023) and ASTM A276/A276M S20100 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X12CrMnNiN17-7-5 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M S20100 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X12CrMnNiN17-7-5 vs ASTM A276/A276M S20100 is a 96.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 96.8%.

Frequently Compared With EN 10088-1 X12CrMnNiN17-7-5:
ASTM A959 201 EN 10088-1 1.4006 EN 10088-1 1.4845 ASTM A959 .- GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
96.8%
MECHANICAL MATCH
No shared data
OVERALL
96.8%
Specifications
Property EN 10088-1 X12CrMnNiN17-7-5 ASTM A276/A276M S20100
Standard EN 10088-1:2023 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.15
Si (%) <=1.00 <=1.00
Mn (%) 5.5-7.5 5.5-7.5
P (%) <=0.045 <=0.060
S (%) <=0.015 <=0.030
Cr (%) 16.0-18.0 16.0-18.0
Ni (%) 3.5-5.5 3.5-5.5
N (%) 0.05-0.25 <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X12CrMnNiN17-7-5 ASTM A276/A276M S20100
Tensile Strength Not specified >=515 MPa
Yield Strength Not specified >=275 MPa
Elongation Not specified >=40%
Condition Not specified Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed)
Typical Applications
EN 10088-1 X12CrMnNiN17-7-5
Not documented
ASTM A276/A276M S20100
Stainless steel bars and shapes (hot-finished or cold-finished)
Can EN 10088-1 X12CrMnNiN17-7-5 Be Substituted With ASTM A276/A276M S20100?
EN 10088-1 X12CrMnNiN17-7-5 and ASTM A276/A276M S20100 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S20100 is often considered as a substitute for EN 10088-1 X12CrMnNiN17-7-5 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X12CrMnNiN17-7-5
0 active listings and RFQs →
ASTM A276/A276M S20100
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X12CrMnNiN17-7-5 and ASTM A276/A276M S20100?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-1 X12CrMnNiN17-7-5 be substituted with ASTM A276/A276M S20100?
EN 10088-1 X12CrMnNiN17-7-5 and ASTM A276/A276M S20100 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S20100 is often considered as a substitute for EN 10088-1 X12CrMnNiN17-7-5 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.