Post Stock Login Register

EN 10088-1 X12CrNiWTiB16-13 vs EN 10088-1 X12Cr13

Related Material — 63% match based on chemical composition and mechanical property overlap.

EN 10088-1 X12CrNiWTiB16-13 (EN 10088-1:2023) and EN 10088-1 X12Cr13 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X12CrNiWTiB16-13 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X12Cr13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X12CrNiWTiB16-13 vs EN 10088-1 X12Cr13 is a 63% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 63%.

Frequently Compared With EN 10088-1 X12CrNiWTiB16-13:
IS 1570 (Part 7) 11Cr17Ni13W3TiH ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
63%
MECHANICAL MATCH
No shared data
OVERALL
63%
Specifications
Property EN 10088-1 X12CrNiWTiB16-13 EN 10088-1 X12Cr13
Standard EN 10088-1:2023 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) 0.07-0.15 0.08-0.15
Si (%) <=0.50 <=1.00
Mn (%) <=1.50 <=1.50
P (%) <=0.035 <=0.040
S (%) <=0.015 <=0.015
Cr (%) 15.5-17.5 11.5-13.5
Ni (%) 12.5-14.5 <=0.75
Ti (%) 0.40-0.70 Not specified
W (%) 2.50-3.00 Not specified
B (%) 0.0015-0.0060 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X12CrNiWTiB16-13 Be Substituted With EN 10088-1 X12Cr13?
EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X12Cr13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X12CrNiWTiB16-13
0 active listings and RFQs →
EN 10088-1 X12Cr13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X12Cr13?
EN 10088-1 X12CrNiWTiB16-13 specifies Ti, W, B which are not specified for EN 10088-1 X12Cr13.
Can EN 10088-1 X12CrNiWTiB16-13 be substituted with EN 10088-1 X12Cr13?
EN 10088-1 X12CrNiWTiB16-13 and EN 10088-1 X12Cr13 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.