Post Stock Login Register

EN 10088-1 X20CrMoV11-1 vs ASTM A959 616

Close Alternative — 72.7% match based on chemical composition and mechanical property overlap.

EN 10088-1 X20CrMoV11-1 (EN 10088-1:2023) and ASTM A959 616 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X20CrMoV11-1 is defined under European Standard (EN), originating from Europe, while ASTM A959 616 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X20CrMoV11-1 vs ASTM A959 616 is a 72.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 72.7%.

Frequently Compared With EN 10088-1 X20CrMoV11-1:
IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 20Cr12MoNiVH ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
72.7%
MECHANICAL MATCH
No shared data
OVERALL
72.7%
Specifications
Property EN 10088-1 X20CrMoV11-1 ASTM A959 616
Standard EN 10088-1:2023 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.17-0.23 0.20-0.25
Si (%) <=0.40 <=0.50
Mn (%) 0.30-1.00 0.50-1.00
P (%) <=0.025 <=0.025
S (%) <=0.015 <=0.025
Cr (%) 10.0-12.5 11.0-12.5
Mo (%) 0.80-1.20 0.90-1.25
Ni (%) 0.30-0.80 0.50-1.00
V (%) 0.20-0.35 0.20-0.30
W (%) Not specified 0.90-1.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X20CrMoV11-1
Not documented
ASTM A959 616
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X20CrMoV11-1 Be Substituted With ASTM A959 616?
EN 10088-1 X20CrMoV11-1 and ASTM A959 616 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X20CrMoV11-1
0 active listings and RFQs →
ASTM A959 616
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X20CrMoV11-1 and ASTM A959 616?
ASTM A959 616 specifies W which is not specified for EN 10088-1 X20CrMoV11-1.
Can EN 10088-1 X20CrMoV11-1 be substituted with ASTM A959 616?
EN 10088-1 X20CrMoV11-1 and ASTM A959 616 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.