Post Stock Login Register

EN 10088-1 X2CrNiMoCuS17-10-2 vs EN 10088-1 X2CrNiMo17-12-2

Strong Match — 94.4% match based on chemical composition and mechanical property overlap.

EN 10088-1 X2CrNiMoCuS17-10-2 (EN 10088-1:2023) and EN 10088-1 X2CrNiMo17-12-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X2CrNiMoCuS17-10-2 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X2CrNiMo17-12-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-1 X2CrNiMoCuS17-10-2 vs EN 10088-1 X2CrNiMo17-12-2 is a 94.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 94.4%.

Frequently Compared With EN 10088-1 X2CrNiMoCuS17-10-2:
EN 10088-1 1.4401 ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
94.4%
MECHANICAL MATCH
No shared data
OVERALL
94.4%
Specifications
Property EN 10088-1 X2CrNiMoCuS17-10-2 EN 10088-1 X2CrNiMo17-12-2
Standard EN 10088-1:2023 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) 0.10-0.20 <=0.015
Cr (%) 16.5-18.5 16.5-18.5
Mo (%) 2.00-2.50 2.00-2.50
Ni (%) 10.0-13.0 10.0-13.0
N (%) <=0.10 <=0.10
Cu (%) 1.30-1.80 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can EN 10088-1 X2CrNiMoCuS17-10-2 Be Substituted With EN 10088-1 X2CrNiMo17-12-2?
EN 10088-1 X2CrNiMoCuS17-10-2 and EN 10088-1 X2CrNiMo17-12-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMo17-12-2 is often considered as a substitute for EN 10088-1 X2CrNiMoCuS17-10-2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X2CrNiMoCuS17-10-2
0 active listings and RFQs →
EN 10088-1 X2CrNiMo17-12-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X2CrNiMoCuS17-10-2 and EN 10088-1 X2CrNiMo17-12-2?
EN 10088-1 X2CrNiMoCuS17-10-2 specifies Cu which is not specified for EN 10088-1 X2CrNiMo17-12-2.
Can EN 10088-1 X2CrNiMoCuS17-10-2 be substituted with EN 10088-1 X2CrNiMo17-12-2?
EN 10088-1 X2CrNiMoCuS17-10-2 and EN 10088-1 X2CrNiMo17-12-2 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X2CrNiMo17-12-2 is often considered as a substitute for EN 10088-1 X2CrNiMoCuS17-10-2 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.