Post Stock Login Register

EN 10088-1 X6CrNiTiB18-10 vs ASTM A959 347H

Strong Match — 90% match based on chemical composition and mechanical property overlap.

EN 10088-1 X6CrNiTiB18-10 (EN 10088-1:2023) and ASTM A959 347H (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X6CrNiTiB18-10 is defined under European Standard (EN), originating from Europe, while ASTM A959 347H is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X6CrNiTiB18-10 vs ASTM A959 347H is a 90% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 90%.

Frequently Compared With EN 10088-1 X6CrNiTiB18-10:
GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
90%
MECHANICAL MATCH
No shared data
OVERALL
90%
Specifications
Property EN 10088-1 X6CrNiTiB18-10 ASTM A959 347H
Standard EN 10088-1:2023 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) 0.04-0.08 0.04-0.10
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.035 <=0.045
S (%) <=0.015 <=0.030
Cr (%) 17.0-19.0 17.0-19.0
Ni (%) 9.0-12.0 9.0-12.0
B (%) 0.0015-0.0050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
EN 10088-1 X6CrNiTiB18-10
Not documented
ASTM A959 347H
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can EN 10088-1 X6CrNiTiB18-10 Be Substituted With ASTM A959 347H?
EN 10088-1 X6CrNiTiB18-10 and ASTM A959 347H overlap closely enough on chemistry and mechanical properties that ASTM A959 347H is often considered as a substitute for EN 10088-1 X6CrNiTiB18-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
EN 10088-1 X6CrNiTiB18-10
0 active listings and RFQs →
ASTM A959 347H
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X6CrNiTiB18-10 and ASTM A959 347H?
EN 10088-1 X6CrNiTiB18-10 specifies B which is not specified for ASTM A959 347H.
Can EN 10088-1 X6CrNiTiB18-10 be substituted with ASTM A959 347H?
EN 10088-1 X6CrNiTiB18-10 and ASTM A959 347H overlap closely enough on chemistry and mechanical properties that ASTM A959 347H is often considered as a substitute for EN 10088-1 X6CrNiTiB18-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.