EN 10088-1 X8CrNiMoVNb16-13 vs IS 6603 X04Cr16Ni5Mo1

Related Material — 63.5% match based on chemical composition and mechanical property overlap.

EN 10088-1 X8CrNiMoVNb16-13 (EN 10088-1:2023) and IS 6603 X04Cr16Ni5Mo1 (IS 6603:2024) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X8CrNiMoVNb16-13 is defined under European Standard (EN), originating from Europe, while IS 6603 X04Cr16Ni5Mo1 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN 10088-1 X8CrNiMoVNb16-13 vs IS 6603 X04Cr16Ni5Mo1 is a 63.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 63.5%.

Frequently Compared With EN 10088-1 X8CrNiMoVNb16-13:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
63.5%
MECHANICAL MATCH
No shared data
OVERALL
63.5%
Specifications
Property EN 10088-1 X8CrNiMoVNb16-13 IS 6603 X04Cr16Ni5Mo1
Standard EN 10088-1:2023 IS 6603:2024
Category Stainless Steel Stainless Steel
C (%) 0.04-0.10 <=0.06
Si (%) 0.30-0.60 <=0.70
Mn (%) <=1.50 <=1.50
P (%) <=0.035 <=0.040
S (%) <=0.015 <=0.015
Cr (%) 15.5-17.5 15.0-17.0
Mo (%) 1.10-1.50 0.80-1.50
Ni (%) 12.5-14.5 4.0-6.0
N (%) 0.06-0.14 >=0.020
V (%) 0.60-0.85 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X8CrNiMoVNb16-13 IS 6603 X04Cr16Ni5Mo1
Tensile Strength Not specified <=1100 MPa
Hardness Not specified <=320 HB
Condition Not specified Soft annealed (+A), conditions 1C, 1E, 1D, 1X, 1G and 2D, all sizes; hardness as printed
Typical Applications
EN 10088-1 X8CrNiMoVNb16-13
Not documented
IS 6603 X04Cr16Ni5Mo1
General purposes, semi-finished products, bars, wire rods and bright bars
Key Differences
Can EN 10088-1 X8CrNiMoVNb16-13 Be Substituted With IS 6603 X04Cr16Ni5Mo1?
EN 10088-1 X8CrNiMoVNb16-13 and IS 6603 X04Cr16Ni5Mo1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-1 X8CrNiMoVNb16-13
0 active listings and RFQs →
IS 6603 X04Cr16Ni5Mo1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X8CrNiMoVNb16-13 and IS 6603 X04Cr16Ni5Mo1?
EN 10088-1 X8CrNiMoVNb16-13 specifies V which is not specified for IS 6603 X04Cr16Ni5Mo1.
Can EN 10088-1 X8CrNiMoVNb16-13 be substituted with IS 6603 X04Cr16Ni5Mo1?
EN 10088-1 X8CrNiMoVNb16-13 and IS 6603 X04Cr16Ni5Mo1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.