Post Stock Login Register

EN 10088-1 X9CrMnNiCu17-8-5-2 vs ASTM A276/A276M S20100

Close Alternative — 79.7% match based on chemical composition and mechanical property overlap.

EN 10088-1 X9CrMnNiCu17-8-5-2 (EN 10088-1:2023) and ASTM A276/A276M S20100 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X9CrMnNiCu17-8-5-2 is defined under European Standard (EN), originating from Europe, while ASTM A276/A276M S20100 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10088-1 X9CrMnNiCu17-8-5-2 vs ASTM A276/A276M S20100 is a 79.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 79.7%.

Frequently Compared With EN 10088-1 X9CrMnNiCu17-8-5-2:
ASTM A959 201 GB/T 3280 06Cr19Ni10 ASTM A959 202 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
79.7%
MECHANICAL MATCH
No shared data
OVERALL
79.7%
Specifications
Property EN 10088-1 X9CrMnNiCu17-8-5-2 ASTM A276/A276M S20100
Standard EN 10088-1:2023 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.10 <=0.15
Si (%) <=1.00 <=1.00
Mn (%) 5.5-9.5 5.5-7.5
P (%) <=0.070 <=0.060
S (%) <=0.010 <=0.030
Cr (%) 16.5-18.5 16.0-18.0
Ni (%) 4.5-5.5 3.5-5.5
N (%) <=0.15 <=0.25
Cu (%) 1.00-2.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X9CrMnNiCu17-8-5-2 ASTM A276/A276M S20100
Tensile Strength Not specified >=515 MPa
Yield Strength Not specified >=275 MPa
Elongation Not specified >=40%
Condition Not specified Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed)
Typical Applications
EN 10088-1 X9CrMnNiCu17-8-5-2
Not documented
ASTM A276/A276M S20100
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can EN 10088-1 X9CrMnNiCu17-8-5-2 Be Substituted With ASTM A276/A276M S20100?
EN 10088-1 X9CrMnNiCu17-8-5-2 and ASTM A276/A276M S20100 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-1 X9CrMnNiCu17-8-5-2
0 active listings and RFQs →
ASTM A276/A276M S20100
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X9CrMnNiCu17-8-5-2 and ASTM A276/A276M S20100?
EN 10088-1 X9CrMnNiCu17-8-5-2 specifies Cu which is not specified for ASTM A276/A276M S20100.
Can EN 10088-1 X9CrMnNiCu17-8-5-2 be substituted with ASTM A276/A276M S20100?
EN 10088-1 X9CrMnNiCu17-8-5-2 and ASTM A276/A276M S20100 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.