Post Stock Login Register

EN 10088-1 X5CrNi18-10 vs UNI 6900 X5CrNi1810

Strong Match — 97.2% match based on chemical composition and mechanical property overlap.

EN 10088-1 X5CrNi18-10 (EN 10088-1:2014) and UNI 6900 X5CrNi1810 (UNI 6900:1971) are both steel grades. Both fall under the Stainless Steel category. EN 10088-1 X5CrNi18-10 is typically used for food, chemical, architectural applications, while UNI 6900 X5CrNi1810 is commonly used for used in kitchen equipment, chemical tanks, piping, architectural panels, food processing equipment, and fasteners.. EN 10088-1 X5CrNi18-10 is defined under European Standard (EN), originating from Europe, while UNI 6900 X5CrNi1810 is defined under Ente Nazionale Italiano di Unificazione (UNI), originating from Italy.

As per chemical composition, EN 10088-1 X5CrNi18-10 vs UNI 6900 X5CrNi1810 is a 97.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 97.2%.

Frequently Compared With EN 10088-1 X5CrNi18-10:
GOST 5632 08X18H10 EN 10088-1 1.4301 GOST 5632 06Kh23N28 EN 10088-1 1.4845 EN 10088-1 1.4006 GOST 5632 12Kh13 EN 10088-1 1.4401 GB/T 3280 06Cr19Ni10 ASTM A959 .- IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
97.2%
MECHANICAL MATCH
No shared data
OVERALL
97.2%
Specifications
Property EN 10088-1 X5CrNi18-10 UNI 6900 X5CrNi1810
Standard EN 10088-1:2014 UNI 6900:1971
Category Stainless Steel Stainless Steel
C (%) <=0.07 0.07 max
Si (%) <=1.00 1.00 max
Mn (%) <=2.00 2.00 max
P (%) <=0.045 0.045 max
S (%) <=0.015 0.015 max
Cr (%) 17.5-19.5 17.50-19.50
Ni (%) 8.0-10.5 8.00-10.50
N (%) <=0.10 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-1 X5CrNi18-10 UNI 6900 X5CrNi1810
Tensile Strength Not specified 520-720 MPa
Yield Strength Not specified 210 MPa min
Elongation Not specified 45% min
Hardness Not specified 187 HB max
Typical Applications
EN 10088-1 X5CrNi18-10
Food, chemical, architectural applications
UNI 6900 X5CrNi1810
Used in kitchen equipment, chemical tanks, piping, architectural panels, food processing equipment, and fasteners.
Key Differences
Can EN 10088-1 X5CrNi18-10 Be Substituted With UNI 6900 X5CrNi1810?
EN 10088-1 X5CrNi18-10 and UNI 6900 X5CrNi1810 overlap closely enough on chemistry and mechanical properties that UNI 6900 X5CrNi1810 is often considered as a substitute for EN 10088-1 X5CrNi18-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
EN 10088-1 X5CrNi18-10
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3900 mm (98.43–153.54 in)
UNI 6900 X5CrNi1810
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2600–3700 mm (102.36–145.67 in)
On M-EX Right Now
EN 10088-1 X5CrNi18-10
3 active listings and RFQs →
UNI 6900 X5CrNi1810
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-1 X5CrNi18-10 and UNI 6900 X5CrNi1810?
EN 10088-1 X5CrNi18-10 specifies N which is not specified for UNI 6900 X5CrNi1810.
Can EN 10088-1 X5CrNi18-10 be substituted with UNI 6900 X5CrNi1810?
EN 10088-1 X5CrNi18-10 and UNI 6900 X5CrNi1810 overlap closely enough on chemistry and mechanical properties that UNI 6900 X5CrNi1810 is often considered as a substitute for EN 10088-1 X5CrNi18-10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.