EN 10088-2 X39Cr13 vs EN 10088-1 X46CrS13

Close Alternative — 84% match based on chemical composition and mechanical property overlap.

EN 10088-2 X39Cr13 (EN 10088-2:2014) and EN 10088-1 X46CrS13 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-2 X39Cr13 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X46CrS13 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-2 X39Cr13 vs EN 10088-1 X46CrS13 is a 84% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 84%.

Frequently Compared With EN 10088-2 X39Cr13:
EN 10088-1 1.4845 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
84%
MECHANICAL MATCH
No shared data
OVERALL
84%
Specifications
Property EN 10088-2 X39Cr13 EN 10088-1 X46CrS13
Standard EN 10088-2:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.36-0.42 0.43-0.50
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=2.00
P (%) <=0.040 <=0.040
S (%) <=0.015 0.15-0.35
Cr (%) 12.5-14.5 12.5-14.0
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-2 X39Cr13 EN 10088-1 X46CrS13
Tensile Strength <=760 MPa Not specified
Elongation >=12% Not specified
Hardness <=240 HB Not specified
Condition Annealed (+A), cold rolled strip, up to 8 mm thick Not specified
Typical Applications
EN 10088-2 X39Cr13
General purposes, hot or cold rolled sheet/plate and strip
EN 10088-1 X46CrS13
Not documented
Can EN 10088-2 X39Cr13 Be Substituted With EN 10088-1 X46CrS13?
EN 10088-2 X39Cr13 and EN 10088-1 X46CrS13 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
On M-EX Right Now
EN 10088-2 X39Cr13
0 active listings and RFQs →
EN 10088-1 X46CrS13
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-2 X39Cr13 and EN 10088-1 X46CrS13?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-2 X39Cr13 be substituted with EN 10088-1 X46CrS13?
EN 10088-2 X39Cr13 and EN 10088-1 X46CrS13 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.