Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
EN 10088-2 X6Cr13 (EN 10088-2:2014) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-2 X6Cr13 is typically used for general purposes, hot or cold rolled sheet/plate and strip, while GB/T 3280 06Cr19Ni10 is commonly used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners..
EN 10088-2 X6Cr13 is defined under European Standard (EN), originating from Europe, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.
As per chemical composition, EN 10088-2 X6Cr13 vs GB/T 3280 06Cr19Ni10 is a 78.9% match.
As per mechanical properties, the match is 8.3%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-2 X6Cr13
GB/T 3280 06Cr19Ni10
Tensile Strength
400-600 MPa
520-720 MPa
Condition
Annealed (+A), cold rolled strip, up to 8 mm thick; Elongation is A80 (under 3 mm) or A (3 mm and over), longitudinal and transverse
Not specified
Yield Strength
>=240 MPa
205-310 MPa
Elongation
>=19%
40-60%
Hardness
Not specified
187 HB max
Typical Applications
EN 10088-2 X6Cr13
General purposes, hot or cold rolled sheet/plate and strip
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Key Differences
GB/T 3280 06Cr19Ni10 specifies Ni which is not specified for EN 10088-2 X6Cr13.
Can EN 10088-2 X6Cr13 Be Substituted With GB/T 3280 06Cr19Ni10?
EN 10088-2 X6Cr13 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between EN 10088-2 X6Cr13 and GB/T 3280 06Cr19Ni10?
GB/T 3280 06Cr19Ni10 specifies Ni which is not specified for EN 10088-2 X6Cr13.
Can EN 10088-2 X6Cr13 be substituted with GB/T 3280 06Cr19Ni10?
EN 10088-2 X6Cr13 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.