EN 10088-3 X2CrNiMoN22-5-3 vs IS 6603 X02Cr22Ni5Mo3N
Close Alternative — 83.3% match
based on chemical composition and mechanical property overlap.
EN 10088-3 X2CrNiMoN22-5-3 (EN 10088-3:2014) and IS 6603 X02Cr22Ni5Mo3N (IS 6603:2024) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-3 X2CrNiMoN22-5-3 is typically used for general purposes, semi-finished products, bars, rods, wire, sections and bright products, while IS 6603 X02Cr22Ni5Mo3N is commonly used for general purposes, semi-finished products, bars, wire rods and bright bars.
EN 10088-3 X2CrNiMoN22-5-3 is defined under European Standard (EN), originating from Europe, while IS 6603 X02Cr22Ni5Mo3N is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, EN 10088-3 X2CrNiMoN22-5-3 vs IS 6603 X02Cr22Ni5Mo3N is a 100% match.
As per mechanical properties, the match is 50%.
Combined, this makes them a close alternative overall at 83.3%.
Frequently Compared With EN 10088-3 X2CrNiMoN22-5-3:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-3 X2CrNiMoN22-5-3
IS 6603 X02Cr22Ni5Mo3N
Tensile Strength
650-880 MPa
>=650 MPa
Yield Strength
>=450 MPa
>=450 MPa
Elongation
>=25%
>=25%
Hardness
<=270 HB
<=290 HB
Condition
Solution annealed (+AT), conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Yield Strength is Rp0.2, Elongation is A (longitudinal), hardness for guidance only
Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Tensile Strength is a minimum as printed, hardness for guidance only
Typical Applications
EN 10088-3 X2CrNiMoN22-5-3
General purposes, semi-finished products, bars, rods, wire, sections and bright products
IS 6603 X02Cr22Ni5Mo3N
General purposes, semi-finished products, bars, wire rods and bright bars
Can EN 10088-3 X2CrNiMoN22-5-3 Be Substituted With IS 6603 X02Cr22Ni5Mo3N?
EN 10088-3 X2CrNiMoN22-5-3 and IS 6603 X02Cr22Ni5Mo3N are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between EN 10088-3 X2CrNiMoN22-5-3 and IS 6603 X02Cr22Ni5Mo3N?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-3 X2CrNiMoN22-5-3 be substituted with IS 6603 X02Cr22Ni5Mo3N?
EN 10088-3 X2CrNiMoN22-5-3 and IS 6603 X02Cr22Ni5Mo3N are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.