Post Stock Login Register

EN 10088-3 X53CrSiMoVN16-2 vs EN 10088-1 X2CrTi24

Related Material — 58.1% match based on chemical composition and mechanical property overlap.

EN 10088-3 X53CrSiMoVN16-2 (EN 10088-3:2014) and EN 10088-1 X2CrTi24 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-3 X53CrSiMoVN16-2 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X2CrTi24 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-3 X53CrSiMoVN16-2 vs EN 10088-1 X2CrTi24 is a 58.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 58.1%.

Frequently Compared With EN 10088-3 X53CrSiMoVN16-2:
EN 10088-1 1.4301 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
58.1%
MECHANICAL MATCH
No shared data
OVERALL
58.1%
Specifications
Property EN 10088-3 X53CrSiMoVN16-2 EN 10088-1 X2CrTi24
Standard EN 10088-3:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
Si (%) 1.30-1.70 <=1.00
Mn (%) <=0.80 <=1.00
P (%) <=0.030 <=0.050
S (%) <=0.010 <=0.050
Cr (%) 15.0-16.5 22.0-25.0
Mo (%) 0.20-0.40 <=0.50
Ni (%) <=0.40 <=0.50
V (%) 0.20-0.40 Not specified
N (%) 0.05-0.20 Not specified
C (%) Not specified <=0.030
Cu (%) Not specified <=0.50
Al (%) Not specified <=0.05
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-3 X53CrSiMoVN16-2 EN 10088-1 X2CrTi24
Hardness <=255 HB Not specified
Condition Annealed (+A), conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 100 mm; hardness for guidance only Not specified
Typical Applications
EN 10088-3 X53CrSiMoVN16-2
General purposes, semi-finished products, bars, rods, wire, sections and bright products
EN 10088-1 X2CrTi24
Not documented
Key Differences
Can EN 10088-3 X53CrSiMoVN16-2 Be Substituted With EN 10088-1 X2CrTi24?
EN 10088-3 X53CrSiMoVN16-2 and EN 10088-1 X2CrTi24 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-3 X53CrSiMoVN16-2
0 active listings and RFQs →
EN 10088-1 X2CrTi24
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-3 X53CrSiMoVN16-2 and EN 10088-1 X2CrTi24?
EN 10088-3 X53CrSiMoVN16-2 specifies V, N which are not specified for EN 10088-1 X2CrTi24. EN 10088-1 X2CrTi24 specifies C, Cu, Al which are not specified for EN 10088-3 X53CrSiMoVN16-2.
Can EN 10088-3 X53CrSiMoVN16-2 be substituted with EN 10088-1 X2CrTi24?
EN 10088-3 X53CrSiMoVN16-2 and EN 10088-1 X2CrTi24 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.