Post Stock Login Register

EN 10088-3 X53CrSiMoVN16-2 vs EN 10088-1 X3CrNiMoN27-5-2

Related Material — 59.2% match based on chemical composition and mechanical property overlap.

EN 10088-3 X53CrSiMoVN16-2 (EN 10088-3:2014) and EN 10088-1 X3CrNiMoN27-5-2 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-3 X53CrSiMoVN16-2 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X3CrNiMoN27-5-2 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-3 X53CrSiMoVN16-2 vs EN 10088-1 X3CrNiMoN27-5-2 is a 59.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 59.2%.

Frequently Compared With EN 10088-3 X53CrSiMoVN16-2:
GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
59.2%
MECHANICAL MATCH
No shared data
OVERALL
59.2%
Specifications
Property EN 10088-3 X53CrSiMoVN16-2 EN 10088-1 X3CrNiMoN27-5-2
Standard EN 10088-3:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
Si (%) 1.30-1.70 <=1.00
Mn (%) <=0.80 <=2.00
P (%) <=0.030 <=0.035
S (%) <=0.010 <=0.015
Cr (%) 15.0-16.5 25.0-28.0
Mo (%) 0.20-0.40 1.30-2.00
Ni (%) <=0.40 4.5-6.5
V (%) 0.20-0.40 Not specified
N (%) 0.05-0.20 0.05-0.20
C (%) Not specified <=0.05
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-3 X53CrSiMoVN16-2 EN 10088-1 X3CrNiMoN27-5-2
Hardness <=255 HB Not specified
Condition Annealed (+A), conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 100 mm; hardness for guidance only Not specified
Typical Applications
EN 10088-3 X53CrSiMoVN16-2
General purposes, semi-finished products, bars, rods, wire, sections and bright products
EN 10088-1 X3CrNiMoN27-5-2
Not documented
Key Differences
Can EN 10088-3 X53CrSiMoVN16-2 Be Substituted With EN 10088-1 X3CrNiMoN27-5-2?
EN 10088-3 X53CrSiMoVN16-2 and EN 10088-1 X3CrNiMoN27-5-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-3 X53CrSiMoVN16-2
0 active listings and RFQs →
EN 10088-1 X3CrNiMoN27-5-2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-3 X53CrSiMoVN16-2 and EN 10088-1 X3CrNiMoN27-5-2?
EN 10088-3 X53CrSiMoVN16-2 specifies V which is not specified for EN 10088-1 X3CrNiMoN27-5-2. EN 10088-1 X3CrNiMoN27-5-2 specifies C which is not specified for EN 10088-3 X53CrSiMoVN16-2.
Can EN 10088-3 X53CrSiMoVN16-2 be substituted with EN 10088-1 X3CrNiMoN27-5-2?
EN 10088-3 X53CrSiMoVN16-2 and EN 10088-1 X3CrNiMoN27-5-2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.