Strong Match — 88.5% match
based on chemical composition and mechanical property overlap.
EN 10088-3 X5CrNiN19-9 (EN 10088-3:2014) and ASTM A959 SS304 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-3 X5CrNiN19-9 is typically used for general purposes, semi-finished products, bars, rods, wire, sections and bright products, while ASTM A959 SS304 is commonly used for food processing, chemical equipment, kitchen equipment.
EN 10088-3 X5CrNiN19-9 is defined under European Standard (EN), originating from Europe, while ASTM A959 SS304 is defined under ASTM International, originating from United States.
As per chemical composition, EN 10088-3 X5CrNiN19-9 vs ASTM A959 SS304 is a 88.5% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 88.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-3 X5CrNiN19-9
ASTM A959 SS304
Tensile Strength
550-750 MPa
Not specified
Yield Strength
>=270 MPa
Not specified
Elongation
>=40%
Not specified
Hardness
<=215 HB
Not specified
Condition
Solution annealed (+AT), conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 40 mm; Yield Strength is Rp0.2, Elongation is A (longitudinal), hardness for guidance only
Not specified
Typical Applications
EN 10088-3 X5CrNiN19-9
General purposes, semi-finished products, bars, rods, wire, sections and bright products
ASTM A959 SS304
Food processing, chemical equipment, kitchen equipment
Key Differences
EN 10088-3 X5CrNiN19-9 specifies N which is not specified for ASTM A959 SS304.
Can EN 10088-3 X5CrNiN19-9 Be Substituted With ASTM A959 SS304?
EN 10088-3 X5CrNiN19-9 and ASTM A959 SS304 overlap closely enough on chemistry and mechanical properties that ASTM A959 SS304 is often considered as a substitute for EN 10088-3 X5CrNiN19-9 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10088-3 X5CrNiN19-9 and ASTM A959 SS304?
EN 10088-3 X5CrNiN19-9 specifies N which is not specified for ASTM A959 SS304.
Can EN 10088-3 X5CrNiN19-9 be substituted with ASTM A959 SS304?
EN 10088-3 X5CrNiN19-9 and ASTM A959 SS304 overlap closely enough on chemistry and mechanical properties that ASTM A959 SS304 is often considered as a substitute for EN 10088-3 X5CrNiN19-9 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.