Strong Match — 93% match
based on chemical composition and mechanical property overlap.
EN 10088-3 X5CrNiN19-9 (EN 10088-3:2014) and IS 6603 X05Cr19Ni9N (IS 6603:2024) are both steel grades.
Both fall under the Stainless Steel category.
EN 10088-3 X5CrNiN19-9 is typically used for general purposes, semi-finished products, bars, rods, wire, sections and bright products, while IS 6603 X05Cr19Ni9N is commonly used for general purposes, semi-finished products, bars, wire rods and bright bars.
EN 10088-3 X5CrNiN19-9 is defined under European Standard (EN), originating from Europe, while IS 6603 X05Cr19Ni9N is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, EN 10088-3 X5CrNiN19-9 vs IS 6603 X05Cr19Ni9N is a 89.5% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 93%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10088-3 X5CrNiN19-9
IS 6603 X05Cr19Ni9N
Tensile Strength
550-750 MPa
550-750 MPa
Yield Strength
>=270 MPa
>=270 MPa
Elongation
>=40%
>=40%
Hardness
<=215 HB
Not specified
Condition
Solution annealed (+AT), conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 40 mm; Yield Strength is Rp0.2, Elongation is A (longitudinal), hardness for guidance only
Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 40 mm; Yield Strength is Rp0.2, Elongation is A (longitudinal)
Typical Applications
EN 10088-3 X5CrNiN19-9
General purposes, semi-finished products, bars, rods, wire, sections and bright products
IS 6603 X05Cr19Ni9N
General purposes, semi-finished products, bars, wire rods and bright bars
Can EN 10088-3 X5CrNiN19-9 Be Substituted With IS 6603 X05Cr19Ni9N?
EN 10088-3 X5CrNiN19-9 and IS 6603 X05Cr19Ni9N overlap closely enough on chemistry and mechanical properties that IS 6603 X05Cr19Ni9N is often considered as a substitute for EN 10088-3 X5CrNiN19-9 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10088-3 X5CrNiN19-9 and IS 6603 X05Cr19Ni9N?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10088-3 X5CrNiN19-9 be substituted with IS 6603 X05Cr19Ni9N?
EN 10088-3 X5CrNiN19-9 and IS 6603 X05Cr19Ni9N overlap closely enough on chemistry and mechanical properties that IS 6603 X05Cr19Ni9N is often considered as a substitute for EN 10088-3 X5CrNiN19-9 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.