Post Stock Login Register

EN ISO 4957 X155CrVMo12-1 vs IS 1570 (Part 4) XT160Cr48

Related Material — 65% match based on chemical composition and mechanical property overlap.

EN ISO 4957 X155CrVMo12-1 (EN ISO 4957:2018) and IS 1570 (Part 4) XT160Cr48 (IS 1570 (Part 4):1988) are both steel grades. EN ISO 4957 X155CrVMo12-1 is classified under Tool & Die Steels, while IS 1570 (Part 4) XT160Cr48 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. EN ISO 4957 X155CrVMo12-1 is defined under European Standard (EN), originating from Europe, while IS 1570 (Part 4) XT160Cr48 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, EN ISO 4957 X155CrVMo12-1 vs IS 1570 (Part 4) XT160Cr48 is a 74.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With EN ISO 4957 X155CrVMo12-1:
DIN EN ISO 4957 1.2344 EN ISO 683-17 100Cr6 EN ISO 4957 1.2316 GOST 5950 3H2W8F GOST 5950 4H5MFS DIN EN ISO 4957 1.2379 GB/T 1299 3Cr2W8V GOST 5950 4H5MFS1 GB/T 1299 4Cr5MoSiV GB/T 1299 4Cr5MoSiV1 AISI 52100 IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
74.6%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property EN ISO 4957 X155CrVMo12-1 IS 1570 (Part 4) XT160Cr48
Standard EN ISO 4957:2018 IS 1570 (Part 4):1988
Category Tool & Die Steels Alloy Steel
C (%) 1.55–1.65 1.50-1.70
Mn (%) 0.20–0.50 0.25-0.50
Cr (%) 11.50–12.50 11.0-13.0
Mo (%) 0.60–0.80 <=0.80
V (%) 0.70–1.00 <=0.80
Si (%) ≤0.40 0.10-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN ISO 4957 X155CrVMo12-1 IS 1570 (Part 4) XT160Cr48
Hardness HRC (hardened) 58–62 Not specified
Hardness HB (annealed) ≤255 Not specified
Wear Resistance Excellent Not specified
Typical Applications
EN ISO 4957 X155CrVMo12-1
Blanking dies, forming dies, thread rolling dies, gauges
IS 1570 (Part 4) XT160Cr48
Not documented
Key Differences
Can EN ISO 4957 X155CrVMo12-1 Be Substituted With IS 1570 (Part 4) XT160Cr48?
EN ISO 4957 X155CrVMo12-1 and IS 1570 (Part 4) XT160Cr48 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN ISO 4957 X155CrVMo12-1
Round Bar → (3 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2500–3200 mm (98.43–125.98 in)
IS 1570 (Part 4) XT160Cr48
No active listings currently.
On M-EX Right Now
EN ISO 4957 X155CrVMo12-1
3 active listings and RFQs →
IS 1570 (Part 4) XT160Cr48
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN ISO 4957 X155CrVMo12-1 and IS 1570 (Part 4) XT160Cr48?
Different category: EN ISO 4957 X155CrVMo12-1 is Tool & Die Steels, IS 1570 (Part 4) XT160Cr48 is Alloy Steel.
Can EN ISO 4957 X155CrVMo12-1 be substituted with IS 1570 (Part 4) XT160Cr48?
EN ISO 4957 X155CrVMo12-1 and IS 1570 (Part 4) XT160Cr48 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.